DMX Altor Receiver CV is a reliable DMX-RDM Receiver for constant voltage Led bars that perfectly matches the needs of your projects.

Features

• 48 Volt input and output voltage.
• Up to 3A current capacity from each channel.
• 4 channel PWM output.
• Can be programmed with NFC and can be addressed.
• RGB-RGBW-Dynamic White Compatibility.
• DMX-RDM compatibility.

Benefits

• DMX Input and Output terminal.
• Non-flammable body.
• 15 years of field experience.
• Integrated termination resistor.
• Less affected by electrical noise, Stable operation
• Wide parametric setting.
• Easy to install with mobile application.

Scope Of Application

• Facade lighting.
• RGB led bar.
• Flexible Led applications.
• Indirect lighting.
• Linear lighting.

Corva DMX 512 splitter is a unique DMX signal repeater with 2 outputs, 2500 V RMS isolation, stylish design, working in accordance with the relevant standarts. It is used to prevent data corruption that may occur in the DMX line. It takes the DMX data at its input, regenerates it without voltage drops and noise, and ensures that your line remains stable continuously.

Features

• Up to 48 Volts input and output voltage.
• 2 fully isolated DMX outputs.
• Integrated ending resistors.
• DMX compatibilty.

Benefits

• Aluminum, stylish solid outer body.
• 10 years of field experience.
• Offline working.
• Less affected by electrical noise, Stable operation.
• 2500V RMS isolation.

Scope Of Application

• Facade lighting.
• Stage lighting.
• RGB-RGBW led bar.
• Wallwasher.

Thory PWMTOCC (Constant Current) Driver is a cost-saving alternative for LED products that need to be driven with constant current by taking PWM input as data and driving the LEDs with constant current at this rate. If your system does not need addressing, if your goal is only synchronous operation of the products, this product will exceed your expectations.

Features

• Input voltage up to 48 Volts.
• PWM input.
• Constant current option in the range of 100-1050 mA.
• RGB-RGBW-Dynamic White Compatibilty.

Benefits

• It can safely drive up to 15 serial LED arrays.
• It can be connected with a data cable up to 500 meters.
• Long cable distance between led and product.
• Non-flammable body.
• 14 years of field experience.
• Stable working.
• Lower costs.

Scope Of Application

• Facade lighting.
• Wallwasher.
• Projector.
• Led Series that require constant current.

Telaris DMX Receiver CC is the perfect choice for DMX controlled LED products that need to be driven with constant current. DMX Applications are in safe hands with wide LED connection options. You can easily connect with 3rd party light consoles and computer supported hardware as plug and play.

Features

• Up to 48 Volts input and output voltage DMX-RDM compatibilty.
• Constant current option in the range of 100-1050 mA.
• Max power limitation.
• Can be programmed with NFC and can be adressed.
• RGB-RGBW-Dynamic hite compatibility.

Benefits

• It can safely drive up to 15 serial LED arrays.
• Non-flammable body.
• Integrated termination resistor.
• Less affected by electrical noise, stable operation.
• Wide parametric setting.
• Easy installation with mobile application.

Scope Of Application

• Facade lighting.
• Wallwasher.
• Projector.
• Led Series that require contant current.

DMX Altor Receiver CV is a reliable DMX-RDM Receiver for constant voltage Led bars that perfectly matches the needs of your projects.

Features

• 48 Volt input and output voltage.
• Up to 3A current capacity from each channel.
• 4 channel PWM output.
• Can be programmed with NFC and can be addressed.
• RGB-RGBW-Dynamic White Compatibility.
• DMX-RDM compatibility.

Benefits

• DMX Input and Output terminal.
• Non-flammable body.
• 15 years of field experience.
• Integrated termination resistor.
• Less affected by electrical noise, Stable operation
• Wide parametric setting.
• Easy to install with mobile application.

Scope Of Application

• Facade lighting.
• RGB led bar.
• Flexible Led applications.
• Indirect lighting.
• Linear lighting.

Corva DMX 512 splitter is a unique DMX signal repeater with 2 outputs, 2500 V RMS isolation, stylish design, working in accordance with the relevant standarts. It is used to prevent data corruption that may occur in the DMX line. It takes the DMX data at its input, regenerates it without voltage drops and noise, and ensures that your line remains stable continuously.

Features

• Up to 48 Volts input and output voltage.
• 2 fully isolated DMX outputs.
• Integrated ending resistors.
• DMX compatibilty.

Benefits

• Aluminum, stylish solid outer body.
• 10 years of field experience.
• Offline working.
• Less affected by electrical noise, Stable operation.
• 2500V RMS isolation.

Scope Of Application

• Facade lighting.
• Stage lighting.
• RGB-RGBW led bar.
• Wallwasher.

Thory PWMTOCC (Constant Current) Driver is a cost-saving alternative for LED products that need to be driven with constant current by taking PWM input as data and driving the LEDs with constant current at this rate. If your system does not need addressing, if your goal is only synchronous operation of the products, this product will exceed your expectations.

Features

• Input voltage up to 48 Volts.
• PWM input.
• Constant current option in the range of 100-1050 mA.
• RGB-RGBW-Dynamic White Compatibilty.

Benefits

• It can safely drive up to 15 serial LED arrays.
• It can be connected with a data cable up to 500 meters.
• Long cable distance between led and product.
• Non-flammable body.
• 14 years of field experience.
• Stable working.
• Lower costs.

Scope Of Application

• Facade lighting.
• Wallwasher.
• Projector.
• Led Series that require constant current.