Crimping force kN 60

B600CND is a new generation of hand-held cordless tools, characterised by a “Bilinear” mechanical design.

Equipped with a Smart Release system which automatically retracts the ram at the end of the operating cycle.

B600CND is suitable for crimping electrical connectors onto conductor cross sections up to 300 mm², using its own range of semicircular 60 kN die sets.

Equipped with Li-Ion 18.0V - 2.0Ah rechargeable high capacity batteries.

The OLED display provides essential real time operating data, including:

• generated crimping force thus verifying accordance with best practice
• battery charge status
• general operating information
• the number of work cycles completed and remaining before recommended maintenance.

The tool is supplied as:

• Basic tool with battery and wrist strap
• Spare battery
• Battery charger
• USB cable
• Plastic carrying case suitable for storing the tool and accessories

The new Generation of battery operated hydraulic tools

The new generation of handheld cordless hydraulic tools heralding a significantly advantageous evolution from past models.

• Design & Comfort
• Ergonomic Design

Features:

• “Bilinear” mechanical design
• Smart Release system to automatically retract the ram at the end of the crimping cycle
• Electronic Pressure Sensor (EPS)
• SMARTOOL technology for viewing and downloading operational data

Bilinear Structure
Operator comfort and convenience are key factors in producing repeatedly consistent high integrity crimped joints.
Cembre ‘nd’ bilinear tools are designed mechanical centre of gravity nearest to the operator’s wrist to optimise the overall ergonomics of the tool and provide a wider support for the hand.
Thus the innovative misalignment between the pump drive mechanism and the hydraulic system both reduce the torque generated on the operator’s wrist and best distribute the stresses acting on the hand.

Smart Release Technology
“Smart Release Technology” is a new development by Cembre comprising an intelligent oil pressure release system which stops the motor at the end of the crimping cycle.
Automatic retraction of the ram only occurs when the operator releases the start button, this allows visual verification of the jaws to ensure that they have fully met prior to releasing.
Similar tools with ‘standard’ automatic return do not permit this visual verification that full compression has taken place before releasing pressure.

Electronic Pressure Sensor
The EPS guarantees the precision of the crimping operation, checking the actual value of pressure and informing the operator of possible errors.

SMARTOOL Technology
SMARTOOL technology enables the user to to store data from up to 200,000 cycles on the integrated memory card for transfer to a computer via a USB cable.

Copper Tube crimping lugs series HR-N

HR series lugs are manufactured from electrolytic copper tube with a purity greater than 99.9% and designed to obtain high electrical conductivity combined with the mechanical strength required to resist vibration and pull out.

CEMBRE lugs are annealed and tin plated for improved surface protection. The annealing process optimizes the structural features of the material allowing easier crimping and greater resistance to mechanical stresses.

The barrel entrance of the lug is chamfered to allow easy conductor insertion, while its length facilitates precise positioning in the crimping die. 

Each lug is marked with:

• CEMBRE logo and part code
• conductor type and csa (mm²)
• stud Ø (mm)
• crimping die code

Copper Tube crimping lugs according to DIN 46235 Series DR-N

DR series lugs are manufactured from electrolytic copper tube with a purity greater than 99.9% and designed to obtain high electrical conductivity combined with the mechanical strength required to resist vibration and pull out.

CEMBRE lugs are annealed and tin plated for improved surface protection. The annealing process optimizes the structural features of the material allowing easier crimping and greater resistance to mechanical stresses.

Dimensions are according to DIN 46235. The barrel entrance of the lug is chamfered to allow easy conductor insertion, while its length facilitates precise positioning in the crimping die. 

Each lug is marked with:

• CEMBRE logo and part code
• conductor type and csa (mm²)
• stud Ø (mm)
• crimping die code

Mechanical tools ZKE range

for insulated and uninsulated end sleeves

The ZKE610N and ZKE616N pliers provide cUL® and UL® certified compression when used with CEMBRE PKE, PKC, PKD and PKT end sleeves.

Weight, only 375 gramm: Excess weight has been eliminated without sacrificing strength and stability

• Handling: Ergonomic shape of the handles
• Comfort: Soft-touch rubber material that better adapts to the operator’s hands under stress
• Performance: Single-aperture head with synchronized compression inserts connected to each other by means of a comb guide system that avoids the creation of burrs on the edges of the compressed end sleeves

The new portable electro-hydraulic pump B68M-P18 is battery operated, for an independent use.

Having the inherent strengths of the Cembre 18V tool range, the B68M-P18 is a lightweight high capacity pump equipped with an innovative remote control, suitable for a wide range of applications.

Designed with improved handling characteristics, the B68M-P18 is easily manageable during the operating process, and has a fiberglass plastic shell with high resistance to wear and damage.

For more information about the Cembre new portable electro-hydraulic pump B68M-P18, please visit our website under following link: http://www.cembre.de/product/details/44242

A Low noise levels aid operator comfort, while additional convenience and safety are provided by the LED lighting on the remote control.

The new Li-Ion 18V 4 Ah batteries offer a high capacity, while improved operating speed, results from a revitalized hydraulic system with double speed action. A maximum pressure sensor, assures greater precision and repeatability of the pressure cycle, while a security valve doubles the provision for operator safety. The unit has a manual pressure release button in case of emergency. Easy access to the oil reservoir is by means of an oil top-up inlet.

The innovative remote control provides LED working lights and an OLED display of essential real time tool operating information including:
- Operating mode selection
- Release mode selection: Smart release, manual release
- Minimum set pressure and momentary pressure reached expressed in bar allows verification of correct operation
- Battery charge level
- No. of cycles performed
- No. of cycles before scheduled recommended maintenance
- Motor temperature
The pump features a rubber pocket to store and protect the remote control.
Selecting the SMART release mode on the OLED display, allows the operating pressure to be maintained until the operating button is released, thus allowing the operator to make a visual check of say, the crimped connection. Releasing the button then automatically releases the pressure.

Crimping cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by USB interface located under the battery.

Since June, the newly developed MARKINGENIUS®MG4 from CEMBRE has been on the market in Germany. An industrial marking system with thermal transfer technology that takes proven features to a new level with new innovative solutions for connectivity, mobility, and compatibility. Start a project in the office and finish it on the job site - the new GeniusPro Mobile app now gives you smart operation on tablet and smartphone, in line with the motto: PRINTING WITHOUT LIMITS. Cembre is the first manufacturer to integrate the flexible 18V rechargeable battery technology into an industrial printer and thus enables unimagined application possibilities.

Find out more about the Cembre thermal transfer printer MARKINGENIUS®MG4 in our Video: https://youtu.be/g3j7aiLWSBk