DOMO CENTER transforms the domestic systems into furnishing accessories: a modern design solution that blends with the existing context, centralising and rationalising the existing services - from the most traditional to the most advanced, in a single point with a modularity of up to 320 modules. Also available with characteristic full-mirror version.

Solutions in harmony with the interior

DOMO CENTER transforms domestic systems into items of interior design: the wall-hanging effect, minimal footprints and finishes make it the ideal solution to bring a touch of personality and modernity to your surroundings. Available in versions with or without doors.

The technological core of the system

With its unmatched modular capacity (320M in the largest version), DOMO CENTER is the technological core of an advanced electrical system. A conventional smart home system can be integrated inside it, together with anti-intrusion and Home Networking devices.

Maximum decorative integration

The version with door and mirror-finish panels ensures elegant aesthetic integration even in the most sophisticated settings, ensuring complete cover for all electrical-system equipment. A unique solution from GEWISS.

Die Wallbox I-CON ist die JOINON-Lösung für den privaten und halböffentlichen Bereich gemäß der internationalen Norm IEC 61851-1.
Sie zeichnet sich durch ihr elegantes und kompaktes Design, die „Einhand-Ladefunktion“, das dynamische Lastmanagement (Dynamic Load Management, DLM), die Hintergrundbeleuchtung und die verschiedenen Montagemöglichkeiten aus: Wandmontage, teilversenkte Montage oder Bodenmontage.

Einhand-System, einfaches Laden

I-CON ist die erste und einzige Wallbox mit Einhand-Bedienung. Da die Ladesteckdose keinen Deckel hat, kann der Benutzer die Ladekupplung einfach mit einer Hand einstecken.

Bluetooth-APP

Eine Konfigurations-APP, die hauptsächlich für den Installateur entwickelt wurde, für die schnelle und intuitive Konfiguration der Ladestation

Intelligentes Management

Ladestationen mit der Funktion „DLM READY“ können die Leistung für das Aufladen von Elektrofahrzeugen, unabhängig und automatisch, jeweils an die im Haus verfügbare Leistung anpassen.

Option für Unterputzmontage

Ein exklusives Merkmal von I-CON: Die Wallbox kann mit dem entsprechenden Zubehör aufputz oder unterputz montiert werden. Die letztere Option ist eine optimale Lösung, denn sie ermöglicht dem Installateur, den Montageplatz für die spätere Installation der Wallbox vorzubereiten.

I-CON wallbox is the JOINON solution for private and semi-public scenarios, in compliance with international standard IEC 61851-1.
It stands out for its elegant and compact design, "one-hand recharge" functionality, Dynamic Load Management (DLM), Back-light, and various installation possibilities: wall-mounting, flush-mounting or floor-mounting.

Easy charging with one-hand system

I-CON is the first and only home wall box with a one-hand system. As it has no cover, the user can easily connect the charging connector with one hand.

Bluetooth APP

A configuration APP, designed primarily for the installer, quickly and intuitively starts up and manages the charging station

Smart management

Charging stations equipped with the “DLM READY” feature can independently and automatically adjust the power output for electric vehicle charging depending on the power available in the home.

Flush-mounted option

An exclusive feature of I-CON: the wall box can be surface mounted or flush mounted, with the appropriate accessories. This latter option provides an optimal solution that allows the installer to prepare the space for subsequent installation of the wall box.

The IEC 309 HP system comprises plugs and socket-outlets from 16 to 125 A in two different versions – straight mobile and 10° flush-mounting – which have IP44/IP54 and IP66/IP67/IP68/IP69 degrees of protection (IP68/IP69 only available for straight versions). The introduction of all the hours references for the earthing contact completes the range for specific applications and installations. The 16-32 A versions are available with screw wiring or fast wiring with spring terminals, while the 63-125A versions propose indirect wiring with mantle terminals.

Safe and intuitive assembly

The 16-32A versions are distinguished by the patented SAFE-LOCK ¼ turn body-grip closure, while the 63-125A versions feature a closure system with captive screws attached to brass inserts made with an increased contrast-flange.

Excellent resistance to stress

The use of high-performance technopolymers and the innest of rubberised surfaces to protect to protect those most exposed to impact (in all 63-125A versions) offer excellent resistance to mechanical stress (IK09), also at low temperatures (down to -25 °C).

Solutions for any application

The IEC 309 HP range meets all industrial application needs in terms of regulation standards and of performance. The devices were made with the inclusion of all the clock references for the earthing contact, thus opening the doors to a world of new applications and installation areas in the most specialised and harsh environments.

4 IP degrees for total protection

The HP straight plugs and socket-outlets are the first and only on the electrotechnical field with IP68 and IP69 degrees of protection. Nickel-plated pins and slevees also offers the best protection against corrosion, oxidation and abrasion, even in critical environmental conditions.

In the event the switch trips, the ReStart devices, after checking the system status, restore the power supply thereby ensuring maximum continuity of service in complete safety.
Available for both residual current circuit breakers and residual current circuit breakers with overcurrent protection, the range is characterized by the Autotest functions, with periodic and automatic control of the residual current protection without interrupting the power supply and PRO with extended control of the system.

All under control

The LEDs on the faceplate of the device provide information on the operating status of the system. At a glance, you can tell if the system is working properly, if the auto-test is in progress, or if there is a fault.

Continuous monitoring guaranteed

After a failure, the ReStart PRO performs a continuous system check until safety is re-established and then resets the protection switch. The auxiliary contact also allows remote monitoring of the system status information.

An always-protected system

Thanks to the GEWISS patented automatic self-test system with no power interruption, the ReStart Autotest ensures maximum protection efficiency and removes the need for the user to manually perform periodic RCCB relay trip tests.

DOMO CENTER transforms the domestic systems into furnishing accessories: a modern design solution that blends with the existing context, centralising and rationalising the existing services - from the most traditional to the most advanced, in a single point with a modularity of up to 320 modules. Also available with characteristic full-mirror version.

Solutions in harmony with the interior

DOMO CENTER transforms domestic systems into items of interior design: the wall-hanging effect, minimal footprints and finishes make it the ideal solution to bring a touch of personality and modernity to your surroundings. Available in versions with or without doors.

The technological core of the system

With its unmatched modular capacity (320M in the largest version), DOMO CENTER is the technological core of an advanced electrical system. A conventional smart home system can be integrated inside it, together with anti-intrusion and Home Networking devices.

Maximum decorative integration

The version with door and mirror-finish panels ensures elegant aesthetic integration even in the most sophisticated settings, ensuring complete cover for all electrical-system equipment. A unique solution from GEWISS.

Die Wallbox I-CON ist die JOINON-Lösung für den privaten und halböffentlichen Bereich gemäß der internationalen Norm IEC 61851-1.
Sie zeichnet sich durch ihr elegantes und kompaktes Design, die „Einhand-Ladefunktion“, das dynamische Lastmanagement (Dynamic Load Management, DLM), die Hintergrundbeleuchtung und die verschiedenen Montagemöglichkeiten aus: Wandmontage, teilversenkte Montage oder Bodenmontage.

Einhand-System, einfaches Laden

I-CON ist die erste und einzige Wallbox mit Einhand-Bedienung. Da die Ladesteckdose keinen Deckel hat, kann der Benutzer die Ladekupplung einfach mit einer Hand einstecken.

Bluetooth-APP

Eine Konfigurations-APP, die hauptsächlich für den Installateur entwickelt wurde, für die schnelle und intuitive Konfiguration der Ladestation

Intelligentes Management

Ladestationen mit der Funktion „DLM READY“ können die Leistung für das Aufladen von Elektrofahrzeugen, unabhängig und automatisch, jeweils an die im Haus verfügbare Leistung anpassen.

Option für Unterputzmontage

Ein exklusives Merkmal von I-CON: Die Wallbox kann mit dem entsprechenden Zubehör aufputz oder unterputz montiert werden. Die letztere Option ist eine optimale Lösung, denn sie ermöglicht dem Installateur, den Montageplatz für die spätere Installation der Wallbox vorzubereiten.

I-CON wallbox is the JOINON solution for private and semi-public scenarios, in compliance with international standard IEC 61851-1.
It stands out for its elegant and compact design, "one-hand recharge" functionality, Dynamic Load Management (DLM), Back-light, and various installation possibilities: wall-mounting, flush-mounting or floor-mounting.

Easy charging with one-hand system

I-CON is the first and only home wall box with a one-hand system. As it has no cover, the user can easily connect the charging connector with one hand.

Bluetooth APP

A configuration APP, designed primarily for the installer, quickly and intuitively starts up and manages the charging station

Smart management

Charging stations equipped with the “DLM READY” feature can independently and automatically adjust the power output for electric vehicle charging depending on the power available in the home.

Flush-mounted option

An exclusive feature of I-CON: the wall box can be surface mounted or flush mounted, with the appropriate accessories. This latter option provides an optimal solution that allows the installer to prepare the space for subsequent installation of the wall box.