The power supply unit LED PowerSupply 160 for DIN rail mount (4 SU) supplies your LED lamps with a DC voltage of 24 V DC and a rated power of 160 W. The output voltage can be increased in 0.5 V increments up to 28.5 V with a rotary switch to compensate line losses. Three LEDs signal operation and partial or full load operation.

The maximum efficiency is 94.5 %, with an efficiency of over 91 % achieved in all load operations above 25 %. Thus, the efficiency tops the requirements of the "80Plus Gold" certificate. The standby power consumption is typ. 0.1 W. The power supplies can be installed in parallel for the operation of higher loads. The devices detect the parallel connection and distribute the load symmetrically among each other.

The use of high-quality components increases the lifetime of the device and also reduces the typical humming noises, that come along with dimming of LEDs.

The DIN rail device also fulfills all requirements of the lamp standards according to IEC 61347-1 and 61347-2-13. Therefore it is suitable for supplying all dimmable and non-dimmable lamps: LED illuminants, halogen lamps, fluorescent lamps and other conventional lamps.

In addition, the device has a integrated short-circuit protection, overload protection and over-temperature protection. All protective functions are self-healing, i.e. when the fault condition is removed, the power supply restarts and provides the output power again.

The Enertex LED PowerSupply 160 is by means of its unique features the perfect solution for the LED supply in your distribution panel.

Voltage input: 230 V AC (50 Hz) Voltage variants: 12 V, 24 V, 48 V Rated output power: 160 W (temperature derating for continuous full load operation) Ultra compact design: Only 4 SU wide DIN rail housing Very high efficiency of up to 94.5 % Low standby consumption of max. 0.3 W Parallel operation of up to 3 devices possible (load is automatically distributed equally among each other) Protection functions: Short-circuit protection, overload protection and overtemperature protection Fulfills all requirements for lamps and LED lamps according to IEC 61347-1 and 61347-2-13 LEDs: power, normal load, max. load Active PFC function