• Full PVC construction with IP65 rating and high UV resistance making it suitable for indoor and outdoor applications
• Driverless design with on-board constant current IC driver and rectifier for direct 220-240V AC power supply- no need for additional drivers
• Over-voltage, over-current and over temperature protection with on-board IC driver
• ATLANTIC AC strip passes Harmonics requirements for Class C for EMC Certification with strip lengths using greater than 25W
• Maximum run length of 50m with cut points every 20cm
• Simple and quick assembly and mounting using range of available accessories
• Available through the Cut to Length service offered by the Robus Conversions team
• Available in 3000K and 4000K 02.31.2 x 2,500

We talked to electrical contractors in the UK and Ireland to define the perfect fire rated downlight. Then we created the ULTIMUM EXPRESS. Quick-release 2 part connector? Check! Colour-coded lever terminals? Check! Transparent connector cover? Check! Loop in, loop out terminal block? Check! This easy-to-connect downlight adapts to your needs with 5W and 7W power options, as well as CCT4 selectable in 2700K, 3000K, 4000K, and 6000K. Need to make a last-minute tweak? No problem, we ensured that the dual wattage switch is readily accessible at the base and the CCT4 switch is close at hand just under the trim. You told us what you wanted, and we listened - the definition of contractor-led design.

KEY FEATURES

• Market-leading transparent 2 part connector for a super easy installation.
• Colour-coded lever terminals with loop in, loop out connections to express your wiring time.
• Front access CCT4 switch featuring 2700K, 3000K, 4000K and 6000K.
• Two downlights in one with dual wattage 5W and 7W power options.
• Energy efficient with a market-leading efficacy of 125Lm/W - 130Lm/W and a lumen output of 660Lm/W – 820Lm/W. • Features high-quality steel fixing springs with PVC protectors. 
• Features dimmable options, compatible with select trailing-edge dimmers.
• Tested for fire resistance with metal web joists and certified for 30/60/90 minutes in solid timber joists. Also rated for moisture resistance and acoustic performance.
• IP65 rating secured with a rubber seal, making this downlight suitable for domestic dining, living, bathroom and bedroom spaces as well as hotel and office reception areas.
• Designed with a replaceable LED light source for ultimate convenience.

Experience a dotless stream of light with the VEGAS COB LED strips.Offering superior colour rendering, high brightness levels, and enhanced durability, VEGAS COB LED strip is perfect for both domestic and commercial lighting projects.

Wondering how the dotless light effect is achieved? It’s all about the density of the LED chips on the strip. VEGAS COB maximises this potential with chip-on-board (COB) technology, which involves using compact LED chips and mounting them directly onto the LED strip substrate. This configuration produces a stunning uniform light effect.

We offer a range of colour choices, from exclusively white to a vibrant spectrum of over 16 million colours through RGB.

• White CCT1: 3000K or 4000K

• RGB 

• RGBW CCT1 LED strip: RGB plus 3000K or 4000K

VEGAS COB is available in IP20 and IP65 variants, ensuring the ideal LED strip lighting solution for any setting, whether indoors or outdoors

This is a system, which when used with appropriate drivers and controllers provides a superb lighting effect for domestic, retail, commercial or entertainment venues. Accessory amplifiers allow the system to be extended to almost unlimited size.

KEY FEATURES

• Ingress protection of IP20 for indoor use and IP67 for wet and damp areas
• Flexible COB LED with 3M adhesive tape
• Lower consumption of 14W/m to achieve excellent illumination whilst reducing energy costs
• Requires 24V driver (sold separately)
• Choose from a range of drivers between 15W and 320W to match the length of flexi-strip required
• Remote, wall-mounted and CONNECT Wi-Fi controllers are available as accessories. Bespoke design and controls can be achieved
• Range of clear easy clip connector packs available as accessories to achieve a continuous light effect
• 3-year ROBUS warranty
• 30,000 hours rated lifetime

In 20 years, we’ve sold sufficient Golf products to cover the length of Hadrian’s wall...eleven times! Combined with an impressive product success rate of 99.7%, the Golf range is a firmly established favourite among our customers. Welcome the newest addition, the Golf Express. You’re fast, but now you can be even faster. This surface fitting comes fully equipped with multi-wattage selection (10W, 15W, 20W) and is engineered to enhance your installation speed. With a single twist, you can effortlessly mount the diffuser and lock it in place with a single screw. The polycarbonate push & pop casing allows you to loop in your conduit of choice from whichever side you prefer. Inside, the LED tray sits on a hinge, keeping your hands free to configure the CCT selectable, wattage options, sensor and emergency pack underneath. Golf Express consolidates all your needs into one convenient product. Burn through your installation, and then shoot off to the next.

KEY FEATURES

• Convenient multi-wattage selection between three power options 10W, 15W and 20W so you won’t have to go back to the store if a change is required.
• CCT3 selectable with six different settings across 3000K, 4000K and 6000K to cater to your client’s preference.
• Standard emergency pack and 10m microwave (which can offer Master/ Slave functionality) are included for a time-saving all-in-one fitting.
• Standout LED hinge tray holds at 90° angle for effortless installation.
• Select from eight distinct bezel options that simply snap onto the fitting, each combining various eyelid and grill styles.
• High efficacy of 85-117Lm/W.
• IP65 rating and IK08 impact rating, suitable for use in retail shops, social housing, public buildings, communal areas, sports centres, stairwells, corridors, and walkways.

A different day, a different client. Stay adaptable with our new SELEST floodlights, available in STANDARD, PLUS, and PIR versions. This range is designed to give you the power of choice. Choose your colour temperature with CCT3 selectable, offering 3000K, 4000K, and 5000K. Choose STANDARD single-wattage options ranging from 10W to 300W, or go PLUS with dual-wattage available in 10W/20W and 30W/50W. Looking for an energy-saving boost? Choose our PIR option! With lumen outputs from 1,240Lm to 46,580Lm, SELEST offers superb efficacy reaching up to 162Lm/W. All this choice saves you time and money, what could be better? Perhaps topping it off with a 5-year warranty (and that’s in addition to our 2-year on-site warranty!).

Key Features:

• Conveniently customisable with CCT3 selectable in 3000K, 4000K, and 5000K.
• Choose your SELEST from a wide range of wattages between 10W and 300W, or stay flexible with SELEST PLUS, our dual-wattage options in 10W/20W and 30W/50W.
• Energy-saving SELEST PIR sensor has an IP65 rating and is available with manual override in both STANDARD and PLUS wattage options.
• Designed for longevity with a self-regulating valve to prevent moisture condensation.
• Pre-drilled mounting bracket boasting a 180° adjustable angle for rapid installation. 
• Exceptionally high efficacy of 141Lm/W - 161Lm/W providing real cost savings.
• Crowned with tough tempered glass to ensure a high impact rating of IK07 (IK06 for PIR version).
• IP65 rated with a prewired 1m black rubber flex for increased security.
• Suitable for use in warehouses, manufacturing plants, garages, workshops & aircraft hangars, retail superstores, gymnasiums, and sports halls.