Surface-mounted LED luminaire made of anodised aluminum profile, which can be ordered with an opal or microprismatic PMMA diffuser, to reduce the glare factor UGR.

The body consists of an "H" profile with dimensions of 62 x 90 mm, where the LED driver is separated in a separate space from the LED modules. Thanks to this design, the LED modules are further away from the diffuser, thus ensuring optimal light scattering from the individual chips.

The luminaire uses components from renowned manufacturers, such as Samsung LED chips and a power supply from the Finnish manufacturer Helvar. On request, the luminaire can be fitted with LEDs with a higher color rendering index CRI> 90.

On request, the luminaires can be manufactured in a variant with variable chromaticity temperature (tunable white) with DALI 2 protocol control.

Luminaires in the standart DALI variant can be equipped with a Casambi unit, thanks to which the luminaire can be controlled and dimmed via a mobile application.

The luminaires can be equipped with an emergency source for 1 hour, or 3h (from a length of 900 mm) with continuous connection with two terminal blocks, either 1-phase, 1-phase DALI, 1-phase with NZ, 1-phase with NZ and DALI or 3-phase (must be specified in the order).

Built-in LED light for installation in suspended ceilings M600 (mineral suspended ceiling). Thanks to the new optical system, the light has a very low glare factor UGR (< 15) and is thus intended for use in offices.

The luminaire uses components from renowned manufacturers, such as Samsung LED chips and a power supply from the Finnish manufacturer Helvar. On order, it is possible to install LEDs with a higher color rendering index CRI > 90 or to equip Gesis GST connectors for faster assembly. Another option is to expand the DALI variant with a Casambi unit, thanks to which the light can be controlled and dimmed via a mobile application.

The body is made of sheet steel with a powder coating finish, standard RAL 9003. Painting in any RAL color is possible on request.

Surface-mounted LED luminaire made of lacquered aluminum profile, which is manufactured in five different diameters from 400 mm up to 1000 mm with a power input from 25 W to 95 W.

The body is made of a curved aluminum profile with a height of only 80 mm and is thus a modern type of luminaire, especially suitable for office buildings, hotels, restaurants or foyers.

The luminaire uses components from renowned manufacturers, such as Samsung LED chips and a power supply from the Finnish manufacturer Helvar. On request, the luminaire can be fitted with LEDs with a higher color rendering index CRI> 90.

Luminiare allready can be ordered included ceiling rose and suply cable so it can be installed as well as suspended.

The luminaire body is made of steel, powder-coated RAL 9003. The grid is specially fixed and is resistant to impact. The lamp is fitted with electronics and diodes from renowned manufacturers.

Optical part: longitudinal and transverse lamella - white painted steel sheet reinforced with a steel rod (4 pcs) with an opal diffuser to reduce glare.

The luminaire has a resistance level of IK10 and received the German certification Ballwurf-Sicherheitszertifikat.

Surface-mounted LED luminaire made of anodised aluminum profile, which can be ordered with an opal or microprismatic PMMA diffuser, to reduce the glare factor UGR.

The body consists of an "H" profile with dimensions of 62 x 90 mm, where the LED driver is separated in a separate space from the LED modules. Thanks to this design, the LED modules are further away from the diffuser, thus ensuring optimal light scattering from the individual chips.

The luminaire uses components from renowned manufacturers, such as Samsung LED chips and a power supply from the Finnish manufacturer Helvar. On request, the luminaire can be fitted with LEDs with a higher color rendering index CRI> 90.

On request, the luminaires can be manufactured in a variant with variable chromaticity temperature (tunable white) with DALI 2 protocol control.

Luminaires in the standart DALI variant can be equipped with a Casambi unit, thanks to which the luminaire can be controlled and dimmed via a mobile application.

The luminaires can be equipped with an emergency source for 1 hour, or 3h (from a length of 900 mm) with continuous connection with two terminal blocks, either 1-phase, 1-phase DALI, 1-phase with NZ, 1-phase with NZ and DALI or 3-phase (must be specified in the order).

Built-in LED light for installation in suspended ceilings M600 (mineral suspended ceiling). Thanks to the new optical system, the light has a very low glare factor UGR (< 15) and is thus intended for use in offices.

The luminaire uses components from renowned manufacturers, such as Samsung LED chips and a power supply from the Finnish manufacturer Helvar. On order, it is possible to install LEDs with a higher color rendering index CRI > 90 or to equip Gesis GST connectors for faster assembly. Another option is to expand the DALI variant with a Casambi unit, thanks to which the light can be controlled and dimmed via a mobile application.

The body is made of sheet steel with a powder coating finish, standard RAL 9003. Painting in any RAL color is possible on request.

Surface-mounted LED luminaire made of lacquered aluminum profile, which is manufactured in five different diameters from 400 mm up to 1000 mm with a power input from 25 W to 95 W.

The body is made of a curved aluminum profile with a height of only 80 mm and is thus a modern type of luminaire, especially suitable for office buildings, hotels, restaurants or foyers.

The luminaire uses components from renowned manufacturers, such as Samsung LED chips and a power supply from the Finnish manufacturer Helvar. On request, the luminaire can be fitted with LEDs with a higher color rendering index CRI> 90.

Luminiare allready can be ordered included ceiling rose and suply cable so it can be installed as well as suspended.