Program extensions for 19" applications

Patch panel for patch cable management

On one height unit, the front recess provides sufficient space for the patch cables to be fed through to the rear into the interior of the enclosure. The brush strip can also be removed after the feed-through patch panel has been installed to simplify the threading of the patch cables. The brush strip serves as dust protection and to prevent air exchange between the front and rear in air-conditioned enclosures.

PP-DF/1
Art. 23510010

To ensure clean patch cable routing in the front area of the 19" enclosure, appropriate cable routing aids are now a must. An unequipped base plate for 19" installation on a height unit can be fitted with various cable routing brackets to accommodate the patch cables. Different cabinet depths can be compensated for with the different versions of the brackets. These are available in the sizes 60 mm (black plastic version), 75 and 110 mm (chrome-plated metal brackets). The brackets can be easily replaced even when mounted. 5 brackets are required for each base plate.

Cable management patch panel for holding max. 5 cable brackets 19"/1 U
PP-KF/1 | Art. 23510011
Cable management bracket made of metal or plastic
KFB 75 mm | Art. 23510012
KFB 110 mm | Art. 23510013KFB 60 mm | Art. 23510014

The REG patch panel is installed in a 19" rack on 3 height units. The front panel can be easily removed with two screws, providing access to a pre-assembled top-hat rail. The patch panel offers space for up to 22 subdivision units and thus enables the mounting of REG patch panels, installation switches and other REG devices. The openings at the top and bottom across the entire rear allow cables to be fed in easily from behind. Earthing studs are provided on the rear left or right side.

REG patch panel, 19"/3 U, 22 HP with pre-mounted top-hat rail
PP-REG 22/3 | Art. 23510015