A ceiling mount system is used in conjunction with an adjuster or screw cap. With this combination, cables can be suspended from ceilings, walls or other surfaces.

Ceiling mounts are available in various sizes, shapes and materials as standard.

The choice of the right system is determined by the diameter of the rope, the weight of the object to be hung, the surface on which it is to be attached and the aesthetic preferences of the customer.

The appropriate fastening materials are required for correct attachment
such as screws and plugs required.

These can also be supplied by Velda Cable Technics.

A screw cap is screwed into a ceiling mount.

With this combination you can swing a rope to a fixed length.
The screw cap has a central opening (hole) through which the rope is fed. The rope is fixed with an end stop in the screw cap.

The quick support and hanging system

The Velda QS system is a quick-hanging system that simplifies the installation procedures of electricity, HVAC, ducting, drop ceilings, signaling, etc. completely changed and simplified.

The QS system offers simple and practical solutions for supporting and hanging the most diverse elements. It is universal, ready to use and light in weight. The systems can be easily manipulated and installed very quickly.

The system reduces physical discomfort during assembly, the repetition of activities, the use of mobile electrical equipment and thus the risk of falling.

Velda Cable Technics supplies stainless and galvanized fine steel cables
highest quality.

In addition, you will also find coated steel cables in all colors and materials as well as colored cables without coating.

The diameter of the ropes varies from 0.54mm to 8.00mm depending on the weight to be suspended. The standard diameters are 1.00 mm, 1.50 mm, 2.00 mm and 3.00 mm.

Standard lengths are always in stock by the meter.

The most common rope constructions are 1 × 19
(rigid), 7×7 (medium) and 7×19 (flexible).

Ropes for fall protection are available in various lengths and designs as standard.

Should you not find what you are looking for within this broad spectrum, then of course we also work to measure. This is even possible for small series from 100 pieces.

A ceiling mount system is used in conjunction with an adjuster or screw cap. With this combination, cables can be suspended from ceilings, walls or other surfaces.

Ceiling mounts are available in various sizes, shapes and materials as standard.

The choice of the right system is determined by the diameter of the rope, the weight of the object to be hung, the surface on which it is to be attached and the aesthetic preferences of the customer.

The appropriate fastening materials are required for correct attachment
such as screws and plugs required.

These can also be supplied by Velda Cable Technics.

A screw cap is screwed into a ceiling mount.

With this combination you can swing a rope to a fixed length.
The screw cap has a central opening (hole) through which the rope is fed. The rope is fixed with an end stop in the screw cap.

The quick support and hanging system

The Velda QS system is a quick-hanging system that simplifies the installation procedures of electricity, HVAC, ducting, drop ceilings, signaling, etc. completely changed and simplified.

The QS system offers simple and practical solutions for supporting and hanging the most diverse elements. It is universal, ready to use and light in weight. The systems can be easily manipulated and installed very quickly.

The system reduces physical discomfort during assembly, the repetition of activities, the use of mobile electrical equipment and thus the risk of falling.