- DALI-2 certified LED driver
- Dimmable with DALI signal
- Independent compact design
- Configurable constant current output via dip-switch
- Switch-Dim function
- Dimming range 1...100%
- Analogue flicker-free dimming
- Open circuit, short circuit, over load protection
- Suitable for use in emergency lighting systems
- Protection class II

- Self-contained emergency lighting LED driver with
DALI interface & automatic test function
- Iithium battery intelligent automatic recharging
- Constant power output
- For LED modules with a forward voltage 6-54V
- Low profile casing (21 x 30 mm cross-section)
- 3h emergency operation
- Lithium batteries (LiFePO4)
- Over discharge protection
- Two colours status display LED
- Bulit-in
- SELV equivalent
- Protection class II

Compact in size
- Fully dynamic charging power1.4- 22kW, 1 and 3 phase charging
- Preset charging power & delay charging time
- 6A, 10A, 13A, 16A, 20A, 25A, 32A output current can be set according to grid type
- Integrated RFID reader, supports whitelisting of RFID tags
- Residual current protection: Type A + DC 6 mA
- Over current, over voltage, under voltage, surge, short circuit, ground fault, over temperature, leakage, and sticking of relay detection
- Equipped for 2W area light
- 1.3" OLED LCD display
- LED status indicators: power, connection, charging and malfunction
- Optional for the socket or fixed cable version

- Super compact design
- Analogue flicker-free
- Primary and secondary sides come with leads
- Protections: opencircuit, shortcircuit, overload, overtemperature
- SELV equivalent
- Driver for built-in use
- Suitable for protection class I and II luminaires
- Protection class II
- Sealed by glue inside, which can strengthen the protection for luminaries required by waterproof and moistureproof

- DALI-2 certified LED driver
- Dimmable with DALI signal
- Independent compact design
- Configurable constant current output via dip-switch
- Switch-Dim function
- Dimming range 1...100%
- Analogue flicker-free dimming
- Open circuit, short circuit, over load protection
- Suitable for use in emergency lighting systems
- Protection class II

- Self-contained emergency lighting LED driver with
DALI interface & automatic test function
- Iithium battery intelligent automatic recharging
- Constant power output
- For LED modules with a forward voltage 6-54V
- Low profile casing (21 x 30 mm cross-section)
- 3h emergency operation
- Lithium batteries (LiFePO4)
- Over discharge protection
- Two colours status display LED
- Bulit-in
- SELV equivalent
- Protection class II

Compact in size
- Fully dynamic charging power1.4- 22kW, 1 and 3 phase charging
- Preset charging power & delay charging time
- 6A, 10A, 13A, 16A, 20A, 25A, 32A output current can be set according to grid type
- Integrated RFID reader, supports whitelisting of RFID tags
- Residual current protection: Type A + DC 6 mA
- Over current, over voltage, under voltage, surge, short circuit, ground fault, over temperature, leakage, and sticking of relay detection
- Equipped for 2W area light
- 1.3" OLED LCD display
- LED status indicators: power, connection, charging and malfunction
- Optional for the socket or fixed cable version