STYLO is the new LED urban and steet products. The luminaire is featured by particular long shape, lines and innovative design. STYLO won the RED DOT DESIGN 2018 Award: It's one of the biggest and most important design awards in the world. An internationally recognized quality label by an expert jury for its high design quality.

MECHANICAL CHARACTERISTICS

• Fixing canopy and body in die cast aluminium UNI EN1706 powder painted.
• Gasket polyurethane without junction points.
• Screen: high transparency flat tempered glass 5mm thickness or
• polycarbonate screen UV resistant (in option).
• Removable metal gear plate.
• Cable gland plastic, M20x1,5 – IP68 (M25X1.5 - IP68 in option).
• Protection degree:
• IP66 | IK08 with polycarbonate screen.
• IP66 | IK07 with flat tempered glass.

ELECTRICAL CHARACTERISTICS

• Insulation class: I, II.
• Power supply: 220-240V - 50/60Hz.
• LED current: 350mA | 525mA | 700mA
• Power factor: > 0.9 (at full load).
• For cable max section 4mm2
• Integrated overvoltage protection:
• SPD integrated 10kV-10kA, type II, with LED signal and thermo fuse to disconnect load at the end of life.
• Pulse withstand >10 kV CM / DM
• Available dimming options:
• F: Fixed power not dimmable.
• DA: Automatic dimming (virtual midnight) with default profile. DAC: Custom DA profile.
• FLC: Constant light flux.
• DB: Dual power with control wire.
• WL: Wireless single point communication system. DALI: Digital dimming interface DALI.
• NEMA: Socket 7 pin (ANSI C136.41).
• ZHAGA: Socket 4 pin (Book 18).

AVAILABLE OPTICS

• STU: Asymmetrical optic for street lighting (urban).
• STE: Asymmetrical optic for street lighting (suburban).
• STW: Asymmetrical optic for wide roads and wet asphalts lighting.
• STA + STA 1: Asymmetrical optic for V and P categories.
• SV: Asymmetrical optic for narrow urban streets or highway entrance/exit turns
• S05: Asymmetrical optic for urban and street lighting.

OPTICAL UNIT CHARACTERISTICS

• Modular optical system.
• Led light source colour temperature: 4000K (3000K in option).
• CRI: ≥70.

ARYA is the new LED luminare for urban lighting of AEC. Its unmistakable design, attention to details and great variety of optics available, make it the perfect solution to confer a distinctive character to the urban landscape and maximize energy savings.

MECHANICAL CHARACTERISTICS

• Fixing and body in die-cast aluminium UNI EN1706 powder coated.
• Silicone gasket.
• Tempered glass thickness 5mm.
• Installations:
• TP: post top installation ø60-ø76mm
• Optical unit 99.85% aluminium with a surface finish in 99.95% with vacuum-sealed deposition. Alluminium grade class A+ (DIN EN 16268).
• Removable optical and gear tray compartment. Opening wiring harness and optical compartment with commonly used tools without sealed parts with adhesives.
• Weight and dimensions: 470x520x68 | Max 7 Kg
• Protection degree IP66 | IK08
• Powder coating graphite cod. 01 Corrosion protection: 1500hr saline fog ISO 9227.

ELECTRICAL CHARACTERISTICS

• Insulation class: I, II.
• Power supply: 220-240V - 50/60Hz.
• LED current:
• Hyper Comfort 250 / 350mA
• Pixled 400 / 500mA
• Power factor: > 0.9 (at full load, F, DA, DAC).
• Mains connection: external connector IP66/68 for cables max 2.5mm2.
• Overvoltage protection up to 10kV in common and differential mode.
• SPD (Optional) 10kV-10kA, type II, provided with LED signalling and thermal fuse for end-of-life load disconnection.
• Available dimming options:
• F: Fixed power not dimmable.
• DA: Automatic dimming (virtual midnight) with default profile. DAC: Custom DA profile. FLC: Constant light flux. WL-ZHAGA: Wireless single point communication system. DALI: Digital dimming interface DALI.
• ZHAGA: Socket 4 pin (Book 18).

AVAILABLE PIXLED OPTICS

• STU-S: Asymmetrical optic for street, urban and cycle-path lighting (narrow emission).
• STU-M: Asymmetrical optic for street, urban and cycle-path lighting (medium emission).
• STU-W: Asymmetrical optic for wide urban and suburban road lighting.
• S03: Asymmetrical optic for wide urban and suburban road lighting.
• S: Symmetrical optic for urban lighting and green areas.
• STA/STA1: Asymmetrical optic for long interdistance and wide roads, V and P class.

AVAILABLE HYPER COMFORT OPTICS

• HC-S: Hyper Comfort roto-symmetric optic for urban lighting and green areas.
• HC-ST: Hyper Comfort asymmetrical optic for urban lighting and green areas.

OPTICAL UNIT CHARACTERISTICS

• Modular optical system.
• LED light source colour temperature: 4000K (3000K in option).
• CRI: ≥70.

ALO is the new Led floodlight specially designed to meet the numerous lighting needs of sports facilities. It allows maximum design flexibility and guarantees high-performance and long-lasting lighting. The ALO series consists of two ALO 1 andALO 3, available in three different versions: with separate external driver for remote use with respect to the projector, with power supply pre-mounted on the fixing bracket and with patented MicroMoover barycentric fixing system.

Connection, heat sink and body in die-cast aluminum UNI EN 1706.
Removable optical system.
Efficiency up to 175lm/W.
Protection degree IP66 with with exchange valve membrane pressure. Mechanical resistance IK08.
Screen in flat tempered glass thickness 5mm.
Insulation class: I.
Power supply: 220÷400V - 50/60Hz.
LED current: 1000/1250mA.
Inclination: + 20° ÷ + 75°
Overvoltage protection ≥ 10kV CM/DM.
SPORT PROFESSIONAL CCT = 5700 K CRI ≥ 70-80-90 TLCI > 80 Flicker factor (FF) < 3%
SPORT RECREATIONAL CCT = 5700 K CRI ≥ 70-80 Flicker factor (FF) < 3% LARGE AREA CCT = 4000 K CRI ≥ 70 Flicker factor (FF) < 3%
DIMMING OPTION
F: Fixed power not dimmable. DALI: Digital dimming interface DALI. DMX: Digital dimming interface through DMX control.

The LED lantern STORY combines innovation of the most advanced LED technology, with the charm of a lantern with great aesthetic value. It is the perfect solution for urban lighting of modern and traditional contexts.

MECHANICAL CHARACTERISTICS

• Fixing, canopy and body in die-cast aluminium UNI EN1706 powder coated.
• Silicone gasket.
• Screen in satinized flat tempered glass thickness 5mm.
• Installations:
• TP: post top installation ø60 (ø76mm optional) S: suspended installation on brackets 1/2” gas
• Optical unit 99.85% aluminium with a surface finish in 99.95% with vacuum-sealed deposition. Aluminium grade class A+ (DIN EN 16268).
• Removable optical and gear tray compartment. Opening wiring harness and optical compartment with commonly used tools without sealed parts with adhesives.
• Weight and dimensions:
• STORY TP: 415x615x415 - 9kg STORY S: 415x546x415 - 9kg
• Protection degree IP66 | IK08
• Powder coating graphite cod. 01 Corrosion protection: 1500hr saline fog ISO 9227.

ELECTRICAL CHARACTERISTICS

• Insulation class: I, II.
• Power supply: 220-240V - 50/60Hz.
• LED current:
• Optic HYPER COMFORT 250mA | 350mA.
• Optic TRIO 525mA | 700mA.
• Power factor: > 0.9 (at full load, F, DA, DAC).
• Mains connection: external connector IP66/68 for cables max section 2.5mm2
• Overvoltage protection up to 10kV in common and differential mode.
• Integrated SPD 10kV-10kA, type II, provided with LED signalling and thermal fuse for end-of-life load disconnection.
• Available dimming options:
• F: Fixed power not dimmable.
• DA: Automatic dimming (virtual midnight) with default profile. DAC: Custom DA profile. FLC: Constant light flux. PLM: Power line single point communication system. WL: Wireless single point communication system. DALI: Digital dimming interface DALI.
• NEMA: Socket 7 pin (ANSI C136.41)
• ZAGHA: Socket 4 pin (ZHAGA Book 18)

AVAILABLE OPTICS

• STU-M/ STU-S:Asymmetrical optic for street, urban and cycle-path lighting.
• STE-M/ STE-S: Asymmetrical optic for suburban street lighting.
• STW: Asymmetrical optic for wide urban and suburban road lighting, specific for wet asphalts.
• S05: Asymmetrical optic for street, urban and green areas lighting.
• SV: Asymmetrical optic for narrow urban streets or highway entrance/exit turns.
• S: Roto-symmetrical optic for parking and urban areas.
• HC-S: Hyper Comfort roto-symmetric optic for urban lighting and green areas.
• HC-ST: Hyper Comfort asymmetrical optic for urban lighting and green areas.

OPTICAL UNIT CHARACTERISTICS

• Modular optical system.
• LED light source colour temperature: 4000K (3000K optional).
• CRI: ≥70

STYLO is the new LED urban and steet products. The luminaire is featured by particular long shape, lines and innovative design. STYLO won the RED DOT DESIGN 2018 Award: It's one of the biggest and most important design awards in the world. An internationally recognized quality label by an expert jury for its high design quality.

MECHANICAL CHARACTERISTICS

• Fixing canopy and body in die cast aluminium UNI EN1706 powder painted.
• Gasket polyurethane without junction points.
• Screen: high transparency flat tempered glass 5mm thickness or
• polycarbonate screen UV resistant (in option).
• Removable metal gear plate.
• Cable gland plastic, M20x1,5 – IP68 (M25X1.5 - IP68 in option).
• Protection degree:
• IP66 | IK08 with polycarbonate screen.
• IP66 | IK07 with flat tempered glass.

ELECTRICAL CHARACTERISTICS

• Insulation class: I, II.
• Power supply: 220-240V - 50/60Hz.
• LED current: 350mA | 525mA | 700mA
• Power factor: > 0.9 (at full load).
• For cable max section 4mm2
• Integrated overvoltage protection:
• SPD integrated 10kV-10kA, type II, with LED signal and thermo fuse to disconnect load at the end of life.
• Pulse withstand >10 kV CM / DM
• Available dimming options:
• F: Fixed power not dimmable.
• DA: Automatic dimming (virtual midnight) with default profile. DAC: Custom DA profile.
• FLC: Constant light flux.
• DB: Dual power with control wire.
• WL: Wireless single point communication system. DALI: Digital dimming interface DALI.
• NEMA: Socket 7 pin (ANSI C136.41).
• ZHAGA: Socket 4 pin (Book 18).

AVAILABLE OPTICS

• STU: Asymmetrical optic for street lighting (urban).
• STE: Asymmetrical optic for street lighting (suburban).
• STW: Asymmetrical optic for wide roads and wet asphalts lighting.
• STA + STA 1: Asymmetrical optic for V and P categories.
• SV: Asymmetrical optic for narrow urban streets or highway entrance/exit turns
• S05: Asymmetrical optic for urban and street lighting.

OPTICAL UNIT CHARACTERISTICS

• Modular optical system.
• Led light source colour temperature: 4000K (3000K in option).
• CRI: ≥70.

ARYA is the new LED luminare for urban lighting of AEC. Its unmistakable design, attention to details and great variety of optics available, make it the perfect solution to confer a distinctive character to the urban landscape and maximize energy savings.

MECHANICAL CHARACTERISTICS

• Fixing and body in die-cast aluminium UNI EN1706 powder coated.
• Silicone gasket.
• Tempered glass thickness 5mm.
• Installations:
• TP: post top installation ø60-ø76mm
• Optical unit 99.85% aluminium with a surface finish in 99.95% with vacuum-sealed deposition. Alluminium grade class A+ (DIN EN 16268).
• Removable optical and gear tray compartment. Opening wiring harness and optical compartment with commonly used tools without sealed parts with adhesives.
• Weight and dimensions: 470x520x68 | Max 7 Kg
• Protection degree IP66 | IK08
• Powder coating graphite cod. 01 Corrosion protection: 1500hr saline fog ISO 9227.

ELECTRICAL CHARACTERISTICS

• Insulation class: I, II.
• Power supply: 220-240V - 50/60Hz.
• LED current:
• Hyper Comfort 250 / 350mA
• Pixled 400 / 500mA
• Power factor: > 0.9 (at full load, F, DA, DAC).
• Mains connection: external connector IP66/68 for cables max 2.5mm2.
• Overvoltage protection up to 10kV in common and differential mode.
• SPD (Optional) 10kV-10kA, type II, provided with LED signalling and thermal fuse for end-of-life load disconnection.
• Available dimming options:
• F: Fixed power not dimmable.
• DA: Automatic dimming (virtual midnight) with default profile. DAC: Custom DA profile. FLC: Constant light flux. WL-ZHAGA: Wireless single point communication system. DALI: Digital dimming interface DALI.
• ZHAGA: Socket 4 pin (Book 18).

AVAILABLE PIXLED OPTICS

• STU-S: Asymmetrical optic for street, urban and cycle-path lighting (narrow emission).
• STU-M: Asymmetrical optic for street, urban and cycle-path lighting (medium emission).
• STU-W: Asymmetrical optic for wide urban and suburban road lighting.
• S03: Asymmetrical optic for wide urban and suburban road lighting.
• S: Symmetrical optic for urban lighting and green areas.
• STA/STA1: Asymmetrical optic for long interdistance and wide roads, V and P class.

AVAILABLE HYPER COMFORT OPTICS

• HC-S: Hyper Comfort roto-symmetric optic for urban lighting and green areas.
• HC-ST: Hyper Comfort asymmetrical optic for urban lighting and green areas.

OPTICAL UNIT CHARACTERISTICS

• Modular optical system.
• LED light source colour temperature: 4000K (3000K in option).
• CRI: ≥70.

ALO is the new Led floodlight specially designed to meet the numerous lighting needs of sports facilities. It allows maximum design flexibility and guarantees high-performance and long-lasting lighting. The ALO series consists of two ALO 1 andALO 3, available in three different versions: with separate external driver for remote use with respect to the projector, with power supply pre-mounted on the fixing bracket and with patented MicroMoover barycentric fixing system.

Connection, heat sink and body in die-cast aluminum UNI EN 1706.
Removable optical system.
Efficiency up to 175lm/W.
Protection degree IP66 with with exchange valve membrane pressure. Mechanical resistance IK08.
Screen in flat tempered glass thickness 5mm.
Insulation class: I.
Power supply: 220÷400V - 50/60Hz.
LED current: 1000/1250mA.
Inclination: + 20° ÷ + 75°
Overvoltage protection ≥ 10kV CM/DM.
SPORT PROFESSIONAL CCT = 5700 K CRI ≥ 70-80-90 TLCI > 80 Flicker factor (FF) < 3%
SPORT RECREATIONAL CCT = 5700 K CRI ≥ 70-80 Flicker factor (FF) < 3% LARGE AREA CCT = 4000 K CRI ≥ 70 Flicker factor (FF) < 3%
DIMMING OPTION
F: Fixed power not dimmable. DALI: Digital dimming interface DALI. DMX: Digital dimming interface through DMX control.