The CL900 is an auto-ranging, true root mean square (TRMS) digital clamp meter that measures AC/DC current via the clamp and measures AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and tests diodes via test-leads. It features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages, and has a dedicated mode for capturing Inrush Current.

• Digital Clamp Meter Measures 2000A AC/DC, 1000V AC/DC, 60MΩ

• Rugged Klein “TOUGH METER” industrial design stands up to jobsite demands; built to withstand a 6.6 ft (2m) drop

• Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy

• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating

• Backlit display for clear visibility in environments with low ambient lighting

• Dedicated mode for capturing Inrush Current

• Non-contact voltage tester integrated into the clamp

• Low impedance (LoZ) mode for identifying and eliminating ghost or stray voltages

• Audible continuity, capacitance, diode test, frequency and duty cycle, min/max feature, data hold capability

• Test leads measure AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance and diodes

• Clamp measures AC and DC current

• Powers off automatically after 30 minutes of non-use to conserve battery life

• Low battery indicator and easily accessible battery compartment

• Includes carrying case (instruction manual), straight input test leads, and 2 x AAA batteries

• Can be used with Magnetic Hanger Cat. No. 69417 (sold separately)

• Cable tester locates, tests and measures coaxial, data (RJ45) and telephone cables (RJ11)
• For detecting wiring errors including miswiring, open circuit, short circuit, split pairs and wiring diagrams
• Detects and tests Power over Ethernet (PoE)
• Measures cable length and distance to a fault using TDR (time domain reflectometry)
• Four tone options available with included probe
• Measure pair-conductor cable lengths up to 457 m (1,500 ft) with an accuracy of up to (±5% + 0.3 m/1 ft)
• Test on one end of the cable or completely test on both ends with the Test-n-Map™ remote locator
• Checks the active network (Ethernet) -- detects performance and connection speed
• Locates and identifies cables with remote locators, Test-n-Map™ remote locator, link LED and tone generator
• Check and detect position in one step (testing on two cable ends) with a set of twenty coax and twenty LAN/RJ45 remote units for testing and locating as well as a Test-n-Map remote unit
• Multiple tone generator (4 cadences) that can send a tone over a single conductor, a pair of conductors or all conductors. Kit includes required Probe-Pro clay locator probe (VDV500-123)
• Visual recognition of hubs or switches and location of cable runs with connection LED
• Stores up to 256 cable or network tests; Reports can be exported and printed
• Brochure with more details and the exact contents of the kit is available for download
• Emits an analog signal that can be detected via analog signal probes

Klein Tools' VDV Ranger TDR Kit allows you to test and measure cable with the latest technology. Time Domain Reflectometry Spread Spectrum (TDR-SS) technology measures cable length up to 3,000 feet (914 m) with superior accuracy. This will help you simplify cable estimating and bill jobs more accurately.

• Test and measure cable with the latest technology

• Time Domain Reflectometry Spread Spectrum (TDR-SS) technology provides superior accuracy up to +/- (1% + 3 ft. /0.91 m) by eliminating interference when measuring cable

• TDR-SS technology broadens TDR environments by operating in Safety Extra Low Voltage (SELV) rated environments as defined by IEC. (SELV is 60 volts DC or Peak AC -- 45 volts RMS)

• Measure cable length up to 3,000 ft. (914 m) including voice, data, video, doorbell, siamese, lamp-wire and NM cables

• Determine if cable run is broken or damaged

• Ensure compliance and identify cable runs outside specification

• The Tone Generator traces and identifies cables. Four tone cadences available. (Requires analog tone probe - VDV526-054 or VDV500-060 -- both sold separately.)

• Measure cable remaining in box or on a reel

• Simplify cable estimating and bill jobs more accurately

• Adapter cord set includes BNC to F-connector adapter, F-connector adapter, insulated push-on F-connector to alligator clips, insulated BNC connector to alligator clips and insulated push-on F-Connector to RJ45 modular plug

• Includes custom designed polyester carrying case

Tradesman Backpack 55597:

Keep your hands free and your tools organized and easily accessible with these new Tradesman Backpack. The high-visibility interiors with 39 different sized pockets make it easy to find the tools.

Tradesman Backpack filled with KLEIN TOOLS INSULATED TOOLS

All tools are 1000V rated and VDE certified for safety on the job.

5-Piece Set of VDE Insulated Screwdrivers 32286INS:
VDE insulated Screwdrivers have ergonomic handles for greater torque and comfort  Set includes 2.5 mm, 4.0 mm, 5.5 mm cabinet, plus No. 1 and No. 2 PoziDriv® tips

Combination Plier 12098-EINS:
Insulated Combination Plier has an integrated crimping function and the pliers toothed pipe-grip stands for greater power. It does cut ACSR, Screws, Nails and Most Hardened Wire

Long Nose Plier 203-7EINS:
Klein Tools insulated Long Nose Plier with Side Cutting is 7“ long

Side Cutting Plier 213-8NE-EINS:
Klein Tools insulated Side Cutting Plier with a Slim Handle is 8'' long

Pump Plier 502-10-EINS:
Klein Tools insulated Pump Pliers with a Slim Handle is 10'' long

The CL900 is an auto-ranging, true root mean square (TRMS) digital clamp meter that measures AC/DC current via the clamp and measures AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and tests diodes via test-leads. It features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages, and has a dedicated mode for capturing Inrush Current.

• Digital Clamp Meter Measures 2000A AC/DC, 1000V AC/DC, 60MΩ

• Rugged Klein “TOUGH METER” industrial design stands up to jobsite demands; built to withstand a 6.6 ft (2m) drop

• Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy

• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating

• Backlit display for clear visibility in environments with low ambient lighting

• Dedicated mode for capturing Inrush Current

• Non-contact voltage tester integrated into the clamp

• Low impedance (LoZ) mode for identifying and eliminating ghost or stray voltages

• Audible continuity, capacitance, diode test, frequency and duty cycle, min/max feature, data hold capability

• Test leads measure AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance and diodes

• Clamp measures AC and DC current

• Powers off automatically after 30 minutes of non-use to conserve battery life

• Low battery indicator and easily accessible battery compartment

• Includes carrying case (instruction manual), straight input test leads, and 2 x AAA batteries

• Can be used with Magnetic Hanger Cat. No. 69417 (sold separately)

• Cable tester locates, tests and measures coaxial, data (RJ45) and telephone cables (RJ11)
• For detecting wiring errors including miswiring, open circuit, short circuit, split pairs and wiring diagrams
• Detects and tests Power over Ethernet (PoE)
• Measures cable length and distance to a fault using TDR (time domain reflectometry)
• Four tone options available with included probe
• Measure pair-conductor cable lengths up to 457 m (1,500 ft) with an accuracy of up to (±5% + 0.3 m/1 ft)
• Test on one end of the cable or completely test on both ends with the Test-n-Map™ remote locator
• Checks the active network (Ethernet) -- detects performance and connection speed
• Locates and identifies cables with remote locators, Test-n-Map™ remote locator, link LED and tone generator
• Check and detect position in one step (testing on two cable ends) with a set of twenty coax and twenty LAN/RJ45 remote units for testing and locating as well as a Test-n-Map remote unit
• Multiple tone generator (4 cadences) that can send a tone over a single conductor, a pair of conductors or all conductors. Kit includes required Probe-Pro clay locator probe (VDV500-123)
• Visual recognition of hubs or switches and location of cable runs with connection LED
• Stores up to 256 cable or network tests; Reports can be exported and printed
• Brochure with more details and the exact contents of the kit is available for download
• Emits an analog signal that can be detected via analog signal probes

Klein Tools' VDV Ranger TDR Kit allows you to test and measure cable with the latest technology. Time Domain Reflectometry Spread Spectrum (TDR-SS) technology measures cable length up to 3,000 feet (914 m) with superior accuracy. This will help you simplify cable estimating and bill jobs more accurately.

• Test and measure cable with the latest technology

• Time Domain Reflectometry Spread Spectrum (TDR-SS) technology provides superior accuracy up to +/- (1% + 3 ft. /0.91 m) by eliminating interference when measuring cable

• TDR-SS technology broadens TDR environments by operating in Safety Extra Low Voltage (SELV) rated environments as defined by IEC. (SELV is 60 volts DC or Peak AC -- 45 volts RMS)

• Measure cable length up to 3,000 ft. (914 m) including voice, data, video, doorbell, siamese, lamp-wire and NM cables

• Determine if cable run is broken or damaged

• Ensure compliance and identify cable runs outside specification

• The Tone Generator traces and identifies cables. Four tone cadences available. (Requires analog tone probe - VDV526-054 or VDV500-060 -- both sold separately.)

• Measure cable remaining in box or on a reel

• Simplify cable estimating and bill jobs more accurately

• Adapter cord set includes BNC to F-connector adapter, F-connector adapter, insulated push-on F-connector to alligator clips, insulated BNC connector to alligator clips and insulated push-on F-Connector to RJ45 modular plug

• Includes custom designed polyester carrying case