Communication modules with our own NeoMesh protocol integrated. Just integrate these into your own devices in order to connect a sensor wireless network. Unlike most other protocols work these at sub-GHz. The range between devices is longer at sub-GHz frequencies and there is less noise or congestion from other devices, compared to 2.4 GHz frequencies. 

NeoMesh is optimized for reliability, scalability and low power operation.

 Low power: Typical lifetime of a device operating on two AA batteries is 7 years. All devices are capable of receiving commands from the network, so they can also be low power actuators – e.g. eTRVs.

Scalability: We can have 65000 devices in the same network. If a device is too far away from the gateway, then that device will route or receive commands from other battery powered devices. Routing in the network is organized by the devices themselves, so large networks do not add complexity to the routing. This means that any building, whatever size, can be covered by devices in the same network. All running on batteries. No repeaters. No IP bus needed.

Reliability: As all devices are connected in a mesh there will always be a route from a device to the gateway, or vice versa. If a device disappears for some reason, then the network is self-healing and commands are routed other ways. There are no critical devices which are mission critical.

Available for 868 MHz or 915 MHz.