The monitoring and power supply systems are a high-tech devices, reliable and easy-to-use central battery systems, constructed in accordance with the requirements of applicable standards and regulations. These systems can monitor circuits and luminaires in a mixed system.

The devices can be flexibly adapted to each facility by diversifying the power supply to fire zones.

Additionally, taking care of the safety of rescue teams, all control panel systems can be forced to work in IT mode, both from the level of the cabinet and by an external signal.

The EXIT family of luminaires are conventional emergency luminaires designed to adapt to any type of installation thanks to the possibility of surface or flush mounting. Its minimalist design and maximum functionality make it ideal for use both inside and outside buildings.

We have used high-quality components in its production, thanks to which the luminaire stands out with its above-average light output parameters, allowing for individual selection of luminaires depending on the needs of the future user of the facility.

In addition, with the use of the HTR-25 system manufactured by AWEX, the EXIT luminaire works well in difficult environmental conditions (low temperatures).

Series of AX luminaires ( AXN 3, AXP 3) are the newest line of universal products designed for surface or recessed mounting inside buildings. They combine high-quality components and highly efficient LED light sources so that they are characterized by above-average appearance and lighting parameters. '

The luminaires can be used to illuminate large areas, also at high altitudes. The discreet design allows them to be used in many facilities where, due to the functionality, a small luminaire is necessary, but with high lighting intensity. This solution is often used in offices, shops, shopping malls, passageways as well as in toilets and social rooms.

Due to the output voltage of 48V DC in compliance with protection class III, the FZLV II system supplies receivers with separated extra low voltage (SELV). The use of SELV voltage ensures safe operation of the system and its components in accordance with the applicable regulations. The system is equipped with its own batteries with a capacity dependent on the load and the necessary backup time of the emergency lighting.

The system is provided with own batteries whose capacity depends on the load and necessary emergency lighting back-up time. It is used particularly within the designated fire zones. Compact design of the cabinet allows the installation of the system in locations where large-size central battery systems cannot be used. In addition, the small systems are enriched with the casing that meets the existing visual standards. The control panel of the system has a large touch screen to allow reading the status of the system, circuits and luminaires on an ongoing basis and setting any system parameters through the interface. The statuses are displayed in the form of both graphics and text. Each luminaire in the system can be assigned a description for easy identification.

FZLV II control units are equipped with big touch screen, which allows reading of system, circuits and luminaires conditions and parameters by using user's interface. The user can individually configure the emergency or dynamic luminaires thanks to the use of SMART technology. There are 3 available modes such as maintained, non-maintained and switchable work modes. The function of luminaires automatic searching and adding to the system eliminates the necessity of manual assignment of addresses - each luminaire has its own, unique address assigned at the production stage.

The monitoring and power supply systems are a high-tech devices, reliable and easy-to-use central battery systems, constructed in accordance with the requirements of applicable standards and regulations. These systems can monitor circuits and luminaires in a mixed system.

The devices can be flexibly adapted to each facility by diversifying the power supply to fire zones.

Additionally, taking care of the safety of rescue teams, all control panel systems can be forced to work in IT mode, both from the level of the cabinet and by an external signal.

The EXIT family of luminaires are conventional emergency luminaires designed to adapt to any type of installation thanks to the possibility of surface or flush mounting. Its minimalist design and maximum functionality make it ideal for use both inside and outside buildings.

We have used high-quality components in its production, thanks to which the luminaire stands out with its above-average light output parameters, allowing for individual selection of luminaires depending on the needs of the future user of the facility.

In addition, with the use of the HTR-25 system manufactured by AWEX, the EXIT luminaire works well in difficult environmental conditions (low temperatures).

Series of AX luminaires ( AXN 3, AXP 3) are the newest line of universal products designed for surface or recessed mounting inside buildings. They combine high-quality components and highly efficient LED light sources so that they are characterized by above-average appearance and lighting parameters. '

The luminaires can be used to illuminate large areas, also at high altitudes. The discreet design allows them to be used in many facilities where, due to the functionality, a small luminaire is necessary, but with high lighting intensity. This solution is often used in offices, shops, shopping malls, passageways as well as in toilets and social rooms.