The lamp housing is made of sheet steel
th. 0.5 mm, mechanical resistance is provided by
an optical white lacquered grid reinforced with
steel wires. The optical part consists of a white raster
and a diffuser, which ensures the effect of a soft
integral light flow. The mechanical resistance of
the luminaires is tested in a German test room
according to the strict DIN 18032 standard.

This type of luminaires is designed for extra clean rooms (operating rooms, ICUs, medicine prodcution) and other areas with high security requirements. The basic body of the luminaire is made of steel sheet metal. 0.5 mm and white powder paint resistant to disinfectant and cleaning agents. Luminaires are mounted on a solid ceiling. It can be mounted directly on usual inflammable surfaces. To open the luminaire, it is necessary to use a suction pad (ordered separately)! Optical cover made of tempered safety glass with opal diffuser is attached to the luminaire by high quality neodymium permanent magnets. This cover is fixed to the luminiare by safety steel wires.

Luminaires suitable for lighting both modern
offices and common rooms. They signify with a
visible height of only 25mm. They are designed to
part of the luminous fluxit went into the upper
half-space (illuminating the ceiling) at a rate of 40%
up and 60% down. This increases the indirect
component of the illumination, which is very
pleasant for people in the room. Luminaires can be
mounted in continuous rows by means of an
interconnecting part

The luminaires are suitable for lighting offices, administrative and social spaces. The luminaires are made of aluminum profile and provided with white powder paint. Luminaires for surface mounting. It can be mounted directly on usual inflammable surfaces. In case of hanging the luminaire, it is necessary to order the "ZLR" cable suspension.  The optical part of the luminaire consists of a classic opal diffuser.

The luminaires are suitable for lighting offices, administrative and social spaces. The 51 mm narrow luminaires with a direct luminous component are made of an aluminum profile, which is provided with white powder paint. The luminaires are designed for pendant mounting. Cable suspensions are part of the luminaire. The optical part of the luminaire consists of a clear plastic lens complemented by a plastic grille. Thanks to the optics, we achieve less glare and even light scattering.