The Gate Valve Servo (GVS) is placed on already installed (angled) gate valves commonly used in central Europe (Germany, Austria, Switzerland, and some other countries). The hand wheel is removed and the GVS is placed on top of the valve stem instead. This allows remote control of the shut-off valve using wireless commands. The wireless communication capabilities include several industry standards (LoRaWAN, Z-Wave, ULE) for easy integration into existing networks. The motor is powered by a 12 V external power supply or - optional – a battery block.

The BVS (Ball Valve Servo) is a motor to retrofit existing and installed ball valves into smart water control devices. Its wireless communication capabilities are compatible with several industry standards (Lora, Z-Wave, ..) for easy integration into existing networks. The motor is powered by a 12 V external power supply or - optional – a battery block. The variable clamps allow mounting even in complex pipe installations. The patented motor coupling ensures easy installation and precise long-term operation. The device can operate in difficult environmental conditions, even submerged underwater, and it allows to directly connect one additional local water sensor pad by cable.

The  Water Sensor is placed in critical positions within the home and will detect even the smallest drops of water thanks to the capillary effect (water is soaked into the colored sensor channel). Detected water results in an alarm sent to a central gateway using Z-Wave or LoRaWAN wireless protocol. The unique feature of this device is the central sensor ring with 4 metal water probes on four corners. This ensures the detection works in all orientations of the device placement. An external second water detection probe can be connected to the main device and it will act as a second sensor differing from the primary probe. The internal temperature sensor will report freezing conditions to protect water installation from further damage.

This water monitor fulfills two functions: On the one hand it determines the water consumption in the house or apartment and on the other hand it detects different types of water leaks and sends alarm messages wirelessly in this case. The sensor consists of two components: a water sound microphone is installed in a suitable place on the water distribution system and connected by a cable to the main unit, which contains the radio communication and data processing electronics. An additional water sensor can optionally be connected by cable. The current version of the Water Monitor is approved for single-family homes and multi-family homes with one single water meter per apartment.