• Slim 640mA KNX Power Supply

The KNX Power Supply KNX-20E-640 is a 640mA power supply with high efficiency and a small footprint of only 3 SU wide (52.5 mm). The device has a bus choke output and additionally extra output for auxiliary power. KNX-20E is able to drive the standard KNX bus system, and the devices on KNX bus are able to be connected by the KNX twisted pairs, that it is very suitable for the monitor and control, within buildings, for lighting, blinds / shutters, security systems, energy management, heating, ventilation and air-conditioning systems, signaling and monitoring systems, surface interfaces and building control systems, remote control, metering, audio / video control, white goods, etc. The aforementioned facilities and systems can interchange and cope with the information; all of the intelligent applications in home or the buildings can thus be controlled through merely an integrated uniform control interface system.

• Slim 1280mA KNX Power Supply

The KNX Power Supply KNX-40E-1280 is a 1280 mA power supply with high efficiency and a small footprint of only 4SU (72 mm). The device has a KNX bus choke output and additional output for auxiliary power. The -30~+70°C wide temperature operating range can meet all kinds of applications. LED indicators are used in case of normal operation, overload conditions and RESET operation. It is perfectly suitable to power up any products labeled with the KNX trademark.

Check more information: https://building.meanwell.com/productSeries.aspx#tag-6-61

LCM-25/40/60KN series is an AC/DC constant current mode output LED driver series featuring the multiple levels selectable by dip switch and the KNX inter face to avoid using the complicated KNX-DALI gateway. LCM-KN operates from 180~295VAC and offers different current levels ranging between 350mA and 1400mA.

Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate
for -30°C~+90°C case temperature under free air convection. In addition, LCM-KN series is equipped with push dimming and synchronization so as to provide the optimal design flexibility for LED lighting system.

Check more information: https://building.meanwell.com/productSeries.aspx#tag-6-68

PWM-60/120/200KN series is a 60W/120W AC/DC LED driver featuring the constant voltage mode with PWM style output, which is able to maintain the color temperature and the brightness homogeneity when driving all kinds of LED strips and the KNX interface to avoid using the complicated KNX-DALI gateway. PWM-60/120KN and PWM-200KN offers 12V & 24V and 12V, 24V, 36V & 48V output models respectively. Thanks to the high efficiency of up to 90%, with the fan-less design, the entire series is able to operate for -40°C ~ +90°C case temperature under free air convection. The minimal dimming level is 0.5% and the output frequency is changeable between 200~4000Hz using ETS setting providing great flexibility for LED lighting applications.

*PWM-200KN is equipped with KNX Data Secure function.

Check more information: https://building.meanwell.com/productSeries.aspx#tag-6-68

• KNX 8-Fold Universal Switching Actuator

The KAA-8R Universal Actuator is suitable for different load situations and possible for many application areas up to 8 independent channels. It receives KNX telegrams and can be used as switch actuator or shutter actuator (planned). Mixed applications from switch and shutter actuator are possible. Each output uses a bistable (latching) relay and can be operated manually via a push button. One green LED per channel for indicating the switching status. The compact design with 4 units (72 mm) wide modular makes it suitable for quick and simple installation. Other functions including heating control and logic functions are integrated to provide the KNX system integrators with high design freedom.

• KNX 4-Fold Dimming Actuator

The KAA-4R4V dimming actuator is a 4 channels device with high-quality independent latching relay. A DC 0(1)-10V signal to perform the dimming on the connected driver at each channel. The dimming curve can be adjusted to linear or logarithmic mode which is suitable for all kinds of luminaire. The product specification indicates the maximum number of LED driver per channel which is easy for building planning. KNX system integrators can easily program it through the ETS system, and it can be operated manually via a push button. The compact design with 4 SU(72mm) wide modular makes it suitable for quick and simple installation, and one green LED on each channel for indicating the switching status.

Check more information: https://building.meanwell.com/productSeries.aspx#tag-6-65

DLC-02-KN is a KNX to DALI gateway used to connect a digital DALI lighting system to the KNX installation. It enables the room-based lighting control units to be conveniently incorporated into the higher-level KNX building management system. This device transforms switch and dim commands from the connected KNX system into DALI telegrams and status information from the DALI bus into KNX telegrams.

DLC-02-KN supports up to 128 DALI-2 devices (part 202/207/208/209) via two independent DALI Bus. The DALI Bus power supply comes directly within DLC-02-KN, so no additional DALI power supply is required. This device comes in 4 built-in relays, providing switching possibilities for home applications and non-dimmable lighting.

• Check more product details: https://building.meanwell.com/newsInfo.aspx?c=10&i=978