The Z-Wave sniffer (Zniffer) and Advance Radio Tool (A.R.T.) lets installers avoid the costs doubling. A.R.T. is the must have tool for installers allowing them to:

• Inspect Z-Wave packets1
• Decode and analyze Z-Wave commands1
• Decrypt secure Z-Wave commands (Security S0 and S2)1
• Generate Z-Wave commands2
• Make on-site signal strength probes2
• Gather network statistics1
• Probe the network using multiple Zniffers2

Zniffer/A.R.T. can work with any Z-Wave controller: Z-Way, Fibaro Home Center, Yubii, Vera, Smart Things, Zipato. It can be complemented with the Z-Way network diagnostics tool or work as a standalone tool. With Zniffer/A.R.T. an experienced engineer can do remote assistance to a junior colleague and instruct how to solve on-site problems.

A.R.T. software requires RaZberry 7 or Z-Uno 2 as a hardware. To enable the new feature a new firmware (version 7.26 or upper for RaZberry 7 and 3.0.9 for Z-Uno 2) and an additional license are required for this feature. Various operating systems are supported: Linux (Debian Buster and upper, Ubuntu 21.04 and upper, 64 bits), Windows (10 and upper, 64 bits), Mac OS X

A.R.T. can decode secure packets (network key need to be learned from the primary controller by including into the network or by exporting keys), parse received Z-Wave command, construct and send Z-Wave commands.

The Z-Wave daughter card for Raspberry Pi. It turns your Raspberry Pi into Z-Wave Smart Home Gateway.

Compatible with Raspberry Pi 1/2/3A/3B/3A+/3B+/4B. It is even possible to connect it to an Orange Pi.

Extended transmission range due to:

• 7th Generation Z-Wave chip;
• Includes the best-in-class antenna designed in the US (by Linx Technologies, Inc.)
• The top-notch firmware makes use of all the latest hardware abilities such as tunable transmit power;
• Compatible with Z-Way, Home Assistant, OpenZWave and others

Certified Z-Wave communication stack Z-Way provides:

• Mobile apps for iOS and Android as well as web-based interface;
• Easy and reliable backup including full Z-Wave network dump and automation settings;
• Notifications via push and E-mail. Battery draining notification won’t let you stay with dysfunctional equipment;
• Advanced diagnostic & network statistics tools, including Z-Wave sniffer;
• Configurable Z-Wave radio frequency (region);
• Optimized queue handling to speed up transmitting process;
• Ability to upgrade firmwares of Z-Wave devices;
• Strong Security S2 encryption standard;
• Easiest device installation using Z-Wave SmartStart. Just scan QR-code to include your Z-Wave device;
• Many 3rd party Apps and Services;
• Open HTTP API for your tailored integrations;
• Graphical UI for smart home automation;
• Advanced home automation using scripting;
• Extensive logging abilities.

Z-Uno is the first and only easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming.

Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired by Arduino project Z-Uno inherits all concepts of easy-to-use hardware and software solutions, keeping maximum flexibility.

Z-Uno is a fully DIY product. It is made for those who are limited by existing choice of Z-Wave products and wants to extend their smart homes with more sensors and actuators: connect LEDs, buttons, switches, motors or any low voltage sensor including most of Arduino compatible sensors. Z-Uno programming is done by writing sketch in simplified C language and loaded into Z-Uno using Arduino IDE.

Many examples and comprehensive tutorials will help you to make your own project. Z-Uno is the perfect companion for you RaZberry 7 gateway. Z-Uno is compatible with other controllers too: among them Fibaro Home Centre 2/3/Lite/Lite 2, Youbii Home, Vera Edge and Zipato Zipabox. 

HARDWARE SPECIFICATION:

• 40 kB Flash memory for your sketches
  
• 8 kB RAM
  
• 2 kB EEPROM
  
• Z-Wave RF transmitter at 9.6/40/100 kbps
• 26 GPIO, 15 are 5V tollerant, 5 are able to wakeup device from deep sleep
• 4 ADC
• 4 PWM
  
• 3UART
  
• 3 SPI
  
• 16interrupts
• 1I2C
• 2x16Bit timers, 1x32 bit timer (GPT)
• 1-Wire(software)
  
• 2 service LEDs
  
• 1 service button
• 1 user test LED
  
• CSEN interface for capacitive touch-buttons
• LDMA controller for fast data transfers
  
• 32Bit Cortex M4F @ 39Mhz CPU

Z-Wave.Me Wiren Board 7 is a modular programmable controller for automation of apartments, houses and offices. The controller can work with wired and wireless sensors and actuators. Support for the Z-Wave and Zigbee wireless home automation protocols is provided by a special expansion board and Z-Way software by the Z-Wave.Me. The controller has passed Z-Wave certification, which guarantees compatibility with all certified Z-Wave devices.

The main advantages of the controller:

• open HTTP/JS/C API for interacting with devices,
• integration with iRidi visualization systems,
• mobile apps for iOS, Android,
• integration with other smart home systems, like HomeAssistant, OpenHAB, NodeRed, etc.,
• voice assistants: Google Assistant, Amazon's Alexa, Apple's Siri,
• scripts allows you to implement flexible house management rules, create schedules, run scenarios,
• full information about the capabilities of devices, about routes in the network, convenient diagnostic tools for the Z-Wave network,
• secure remote access for management from anywhere in the world without using a static IP.

The WirenBoard 7 controller contains the 7th generation Z-Wave chip, which provides the following modern features:

• direct line of sight transmission distance of 1.6 km in Z-Wave Long Range mode;
• Smart Start for a trouble-free deployment of a big installation;
• high data transfer rate of 100 kb/sec allows you to transfer data faster, it saves battery power;
• the Z-Wave PlusTM v2 certification standard guarantees compatibility of devices from different manufacturers;
• mandatory for all devices, S2 encryption protects against listening to the radio.

The WirenBoard 7 also contains an EFR32MG21 chip, which provides communication with Zigbee and Thread.