Reliable switch-off and easy switch on DFS FANA and DHS FANA: emergency switching off with remote operation

With the DPRCD-M, the residual current protection expert Doepke is presenting a compact module for assembling a five-pole personal protection switch for 400 V sockets.

Over just 8 module widths, the DPRCD-M combines an AC-DC sensitive residual current protection device with mains and protective conductor monitoring to increase the level of protection in mobile distribution boards. With a rated residual current of 30 mA, the DPRCD-M offers reliable personal protection and also ensures the protective function of upstream residual current circuit-breakers due to a 6 mA DC threshold. The module also offers external residual current and rotating field detection.

PRCDs are used between the socket and the load. Typical applications include the construction sector, events industry and also rescue operations.

The DPRCD-M from Doepke is available up to 63 A rated current. It offers full flexibility as the module can be used in a wide range of mobile distribution boards (mounted on mounting rails).

Predictive maintenance is an integral part of industry 4.0. It refers to proactive maintenance of installations with the goal of avoiding costly failures or damage. Data on the condition of the installation and forecasts regarding future installation behaviour are used for this purpose.

Residual current protection specialist Doepke offers e.Guard, a smart, modular system for condition monitoring of electrical installations. e.Guard continuously monitors and records residual currents. This allows the periodic insulation test in accordance with DIN VDE 0105-100/A1 to be dispensed with. In addition, e.Guard uses machine learning to detect gradual faults at an early stage, allowing intervention before downtime occurs.

Doepke e.Guard is designed in five levels and can therefore be planned according to individual requirements – from a flexible individual solution through to fully integrated monitoring of the system landscape for complex industrial structures.

With the expansion of renewable energy, the demand for photovoltaic systems and heat pumps has grown. Doepke Schaltgeräte GmbH offers specialised residual current protection devices tailored to these applications.

The DFS PV has been specially developed for use in photovoltaic systems, and the DFS HP (HP for Heat Pump) [AB1] for use in installations with heat pumps.
Since both photovoltaic systems and heat pumps use inverters that can generate smooth DC residual currents, Doepke recommends the use of AC-DC sensitive residual current devices for all PV and heat pump installations.

The protection level of these residual current circuit-breakers for the energy transition meets the requirements of PV and heat pump manufacturers. In addition, the short-time delay optimised for these applications ensures increased system availability.

[AB1]Erklären wir im Deutschen ja nur, weil man sich wundern könnte, dass es nicht „WP“ für „Wärmepumpe“ ist, oder? Dann würde ich das im Englischen weglassen.

A common cause of damage to electronic equipment in households, trades and industry is an interruption of the neutral conductor. This can lead to overvoltage, often destroying connected electronically controlled devices and in the worst case causing fires.

The solution: the new residual current circuit-breakers (DFS) and main switches (DHS) with the suffix NU protect modern electronics against overvoltages caused by phase shifts. Here, NU stands for mains monitoring.[AB1]

DFS 6 NU and DHS 6 NU monitor all line conductors and the neutral conductor on the supply side. If an interruption is detected, the device trips – reliably protecting, for example, routers, TVs, induction hobs, smart home devices or electronic machine controls.

The DHS 6 NUS provides extended protection. With an additional sensor, it monitors not only the mains conductors but also the neutral conductor bar within the distribution board – for comprehensive equipment protection.

[AB1]Hat in der englischen Variante vielleicht keinen Mehrwert und könnte man streichen.

With the DPRCD-M, the residual current protection expert Doepke is presenting a compact module for assembling a five-pole personal protection switch for 400 V sockets.

Over just 8 module widths, the DPRCD-M combines an AC-DC sensitive residual current protection device with mains and protective conductor monitoring to increase the level of protection in mobile distribution boards. With a rated residual current of 30 mA, the DPRCD-M offers reliable personal protection and also ensures the protective function of upstream residual current circuit-breakers due to a 6 mA DC threshold. The module also offers external residual current and rotating field detection.

PRCDs are used between the socket and the load. Typical applications include the construction sector, events industry and also rescue operations.

The DPRCD-M from Doepke is available up to 63 A rated current. It offers full flexibility as the module can be used in a wide range of mobile distribution boards (mounted on mounting rails).

Predictive maintenance is an integral part of industry 4.0. It refers to proactive maintenance of installations with the goal of avoiding costly failures or damage. Data on the condition of the installation and forecasts regarding future installation behaviour are used for this purpose.

Residual current protection specialist Doepke offers e.Guard, a smart, modular system for condition monitoring of electrical installations. e.Guard continuously monitors and records residual currents. This allows the periodic insulation test in accordance with DIN VDE 0105-100/A1 to be dispensed with. In addition, e.Guard uses machine learning to detect gradual faults at an early stage, allowing intervention before downtime occurs.

Doepke e.Guard is designed in five levels and can therefore be planned according to individual requirements – from a flexible individual solution through to fully integrated monitoring of the system landscape for complex industrial structures.

With the expansion of renewable energy, the demand for photovoltaic systems and heat pumps has grown. Doepke Schaltgeräte GmbH offers specialised residual current protection devices tailored to these applications.

The DFS PV has been specially developed for use in photovoltaic systems, and the DFS HP (HP for Heat Pump) [AB1] for use in installations with heat pumps.
Since both photovoltaic systems and heat pumps use inverters that can generate smooth DC residual currents, Doepke recommends the use of AC-DC sensitive residual current devices for all PV and heat pump installations.

The protection level of these residual current circuit-breakers for the energy transition meets the requirements of PV and heat pump manufacturers. In addition, the short-time delay optimised for these applications ensures increased system availability.

[AB1]Erklären wir im Deutschen ja nur, weil man sich wundern könnte, dass es nicht „WP“ für „Wärmepumpe“ ist, oder? Dann würde ich das im Englischen weglassen.