CONTAX D-6041-BUS

Smart charger suitable for any type of electrical vehicles

Attractive design, easy operation and trouble free installation both in residential garages and in the tertiary sector

A charge modulator to optimise the highest charge within the shortest possible period without exceeding the supply capacity

Residual direct current detector to protect people.

Wi-Fi communications.

We can view the status, download charging station and home consumption history logs and act on the charging station conveniently via APP VIARIS with a smartphone.

Remote firmware updates.

Mobile phone notifications.

Standard MQTT network protocol.

LED lamps provide VIARIS UNI state and vehicle charge progress indication.

Tactile sensor or RFID

PC enclosure with IK10 high strenght and high heat distortion temperature.

IP54 degree of protection

Dims light from 10% to 100% for concealed mounting in electrical installation box.

Fast installation and requires no work or neutral connection.

Valid for LED lamps up to 100 VA and halogen or incandescent lamps up to 150 W.

Reduced size for fitting between a pushbutton and the mechanism box, or concealed in inspection boxes, suspended ceilings, etc.

Press and let go will switch lights On/Off. Press and hold will dim the lights to the required level.

Quick non-disruptive installation; no neutral connection required.

Memory function for desired switch on level.

Reduces lighting power consumption and increases lamp service life.

Compatible with all commercially available push buttons.

Suitable for 2-way switching installations.

Suitable for all dimmable lamps, except 12 V dc LEDs operating with electromagnetic transformers.

Includes overload, thermal and short-circuit protection.

Presence detector with especially large detection capacity: of 7 m height and

30 m diameter.

Continuous ambient lighting measuring.

Zero-crossing relay for LED loads up to 500 VA.

Great detection capacity: 7m high 10m diameter to 3.5m high 30m diameter

Surface-mounting on the ceiling through a plug-in base for faster installation.

Classified as a presence detector by its high detection capacity and because it is equipped to continuously measure ambient light levels.

Optionally it can be programmed using the remote control MANDO CR which allows the changing of parameters and functions without the need of a ladder or tools. It streamlines and simplifies both installation and maintenance.

Status LED: detects movement or changes in lighting conditions.

Stepless dimming timing.

Pulse function: 1 s ON / 4 s OFF.

Zero-crossing relay for a better switching of LED-type loads.

Adjustable parameters: detection area, timing, and light sensitivity.

Detection field limiter included.

Accesory: remote control

Daily updating and easy programming guided by text menus.

Fixed or astronomical manoeuvres (sunrise and sunset).

With Bluetooth connection for smartphone programming.

4 annual periods for special programming.

Backlit display to improve viewing, even in the dark.

Power supply:230 ± 10 % Vac

Frequency:50 / 60 Hz

Switching capacity:16(10) A / 250 V ac

Degree of protection:IP20 according to EN 60529

DIN rail 2 modules

Operating temperature:-10 ºC to 45 ºC

Smart charger suitable for any type of electrical vehicles

Attractive design, easy operation and trouble free installation both in residential garages and in the tertiary sector

A charge modulator to optimise the highest charge within the shortest possible period without exceeding the supply capacity

Residual direct current detector to protect people.

Wi-Fi communications.

We can view the status, download charging station and home consumption history logs and act on the charging station conveniently via APP VIARIS with a smartphone.

Remote firmware updates.

Mobile phone notifications.

Standard MQTT network protocol.

LED lamps provide VIARIS UNI state and vehicle charge progress indication.

Tactile sensor or RFID

PC enclosure with IK10 high strenght and high heat distortion temperature.

IP54 degree of protection

Dims light from 10% to 100% for concealed mounting in electrical installation box.

Fast installation and requires no work or neutral connection.

Valid for LED lamps up to 100 VA and halogen or incandescent lamps up to 150 W.

Reduced size for fitting between a pushbutton and the mechanism box, or concealed in inspection boxes, suspended ceilings, etc.

Press and let go will switch lights On/Off. Press and hold will dim the lights to the required level.

Quick non-disruptive installation; no neutral connection required.

Memory function for desired switch on level.

Reduces lighting power consumption and increases lamp service life.

Compatible with all commercially available push buttons.

Suitable for 2-way switching installations.

Suitable for all dimmable lamps, except 12 V dc LEDs operating with electromagnetic transformers.

Includes overload, thermal and short-circuit protection.

Presence detector with especially large detection capacity: of 7 m height and

30 m diameter.

Continuous ambient lighting measuring.

Zero-crossing relay for LED loads up to 500 VA.

Great detection capacity: 7m high 10m diameter to 3.5m high 30m diameter

Surface-mounting on the ceiling through a plug-in base for faster installation.

Classified as a presence detector by its high detection capacity and because it is equipped to continuously measure ambient light levels.

Optionally it can be programmed using the remote control MANDO CR which allows the changing of parameters and functions without the need of a ladder or tools. It streamlines and simplifies both installation and maintenance.

Status LED: detects movement or changes in lighting conditions.

Stepless dimming timing.

Pulse function: 1 s ON / 4 s OFF.

Zero-crossing relay for a better switching of LED-type loads.

Adjustable parameters: detection area, timing, and light sensitivity.

Detection field limiter included.

Accesory: remote control