Half the DALI addresses, half the LED drivers. Looping input connectors, dual outputs for sensors. Remarkable savings in emissions as well as commissioning & controller device costs. Two ways to make use of this innovation.

The first LED driver model of the new series is out now: 80 W D4i-certified SELV LC80SE-DA-250-1050-DUAL-LOOP!

Two luminaires with one driver

Major reduction in CO2 emissions throughout the whole lifetime. Flexible outputs allowing load variation or operation with even single luminaire in case of failures

Smart sensor/radio integration

No compromise on intelligent lighting capabilities. Smart Data, D4i certification and two different outputs: powered DALI and auxiliary DALI power supply.

Half the DALI addresses

Substantial savings in control equipment and commissioning costs. Connect double the luminaires per DALI subnet compared to normal drivers, less routers and controllers on site.

Two ways of use

Either as a part of DALI-2 installation, or then wirelessly controllable with smart sensors and radio nodes.

Recycled plastic housing

Embracing the circular economy, making use of recycled materials.

Reach new heights in sustainable and efficient lighting with the new concept of DUAL-LOOP!

Available now, launched as Casambi Ready and designed for wireless luminaires in variety of applications, this compact solution delivers all the benefits of Freedom’s luminaire-based product family in a small but powerful package with 42 Watts of power. With this MINI driver, customers gain access to a complete radio-integrated control solution with sensor input, without the need for external control units or third-party components.

The real unique value proposition with our MINI Freedom drivers is the integrated sensor connector right next to the DIP switch. With the innovative plug-and-play sensor connectivity to our Freedom Sense, it reduces substantially the overall project costs while retaining full Casambi compatibility, delivering scalable wireless lighting without compromising performance.

See also our other Freedom Series products for wireless control of luminaires, including linear, MINI and compact drivers, with possibility for interchangeable Nodes for optimal antenna positioning as well as versatile control system support. Coming soon also D4i Casambi built-in sensor and intra-luminaire slim DALI bus power supply unit!

Discover the whole HE-DA LED driver family with 35 / 50 / 80 / 120 / 165 W models available now!

HE-DA Series do not carry the high efficiency only in the naming - the efficiency of the model range peaks at impressive 96 % in 165 W model! The efficiency stability is extraordinary across the operating windows too, even with lower loads. This means lower energy bills and long term investment for our environment.

Doubled output connectors in 120 W & 165 W models minimize the amount of wiring in luminaires with 2 rows of parallel LED modules. Wide operating windows will cover wide range of LED loads and reduce the number of driver product codes in the luminaire manufacturer’s warehouse.

Output current of the 35 W, 50 W and 80 W models can be set conveniently with DIP switches, and that is not all! Through Helvar Components’ innovative Smart Switch technology, the DIP switch current values for different positions can also be programmed with NFC or DALI bus by the user to differ from the factory defaults! Program your custom output currents in our Helvar Driver Configurator tool and driver will follow this in DIP switch setting.

Ensuring future-proofness of the HE-DA Series, the Smart Data (DALI Parts 251-253) banks are built in as well as Helvar Components exclusive histograms for even more in-depth data logging throughout the driver lifetime.

The familiar set of modern features like Switch-Control 3, Corridor Control, DC Emergency mode with central battery support and CLO are onboard, everything programmable flexibly through wireless NFC or DALI bus.

Smart BiSwitchable redefines what switchable drivers are capable of. In addition to extraordinary value-adding features, SBS Series launches the Set by Mains feature which allows simple yet effective on-site lumen-level control without the need for external interfaces or accessories. Designed to eliminate the traditional limitations of switch-only specifications, Smart BiSwitchable brings intelligence to on/off switchable applications. However, under all that there is still a solid premium on/off LED driver that all of the customers are familiar of — it’s up to you whether to enable the intelligence or go with the traditional way.

The first LED driver model of the new series is out now: 80 W non-SELV LL80HE-SBS-50-800!

Use it as a switchable on/off LED driver, or unlock the smart adjustability if desired — your choice.

Why is Smart BiSwitchable the most intelligent switchable LED driver series in the world:

Market-leading efficiency

Up to astonishing 96.5 %.

Smart Switch

Did you know this - you can configure custom DIP switch currents yourself via NFC!

250 V or 350 V operating window

Now you can unlock higher Uout potential from the LED driver by enabling higher operating voltage range via NFC! There is no more versatile way on the market to make use of different LED module combinations with one single driver.

CLO and internal active thermal protection

Integrated for maximizing the energy-saving potential and robustness of the driver.

Start-up fading setting

Enable for extra smoothness and visual comfort.

Histograms for data

Analyse LED driver usage statistics as the Histograms feature records how each LED driver operates throughout its life - input voltage, temperature, and output levels.

Set by Mains - Revolution of multilumen technology

Traditional multilumen luminaires require on-site DIP switch adjustments, opening the luminaires for accessing these and moving man lifts as well as costly electricians’ hours when adjusting lumen levels, especially after the installation.

This new and innovative technology will transform Smart BiSwitchable models into intelligent adjustable devices with up to five output levels configurable via NFC.

No extra accessories, tools or even disassembly of the luminaires are needed. The setting of the desired choice between preset light levels is done with just switching the mains input in a certain cycle.

Half the DALI addresses, half the LED drivers. Looping input connectors, dual outputs for sensors. Remarkable savings in emissions as well as commissioning & controller device costs. Two ways to make use of this innovation.

The first LED driver model of the new series is out now: 80 W D4i-certified SELV LC80SE-DA-250-1050-DUAL-LOOP!

Two luminaires with one driver

Major reduction in CO2 emissions throughout the whole lifetime. Flexible outputs allowing load variation or operation with even single luminaire in case of failures

Smart sensor/radio integration

No compromise on intelligent lighting capabilities. Smart Data, D4i certification and two different outputs: powered DALI and auxiliary DALI power supply.

Half the DALI addresses

Substantial savings in control equipment and commissioning costs. Connect double the luminaires per DALI subnet compared to normal drivers, less routers and controllers on site.

Two ways of use

Either as a part of DALI-2 installation, or then wirelessly controllable with smart sensors and radio nodes.

Recycled plastic housing

Embracing the circular economy, making use of recycled materials.

Reach new heights in sustainable and efficient lighting with the new concept of DUAL-LOOP!

Available now, launched as Casambi Ready and designed for wireless luminaires in variety of applications, this compact solution delivers all the benefits of Freedom’s luminaire-based product family in a small but powerful package with 42 Watts of power. With this MINI driver, customers gain access to a complete radio-integrated control solution with sensor input, without the need for external control units or third-party components.

The real unique value proposition with our MINI Freedom drivers is the integrated sensor connector right next to the DIP switch. With the innovative plug-and-play sensor connectivity to our Freedom Sense, it reduces substantially the overall project costs while retaining full Casambi compatibility, delivering scalable wireless lighting without compromising performance.

See also our other Freedom Series products for wireless control of luminaires, including linear, MINI and compact drivers, with possibility for interchangeable Nodes for optimal antenna positioning as well as versatile control system support. Coming soon also D4i Casambi built-in sensor and intra-luminaire slim DALI bus power supply unit!

Discover the whole HE-DA LED driver family with 35 / 50 / 80 / 120 / 165 W models available now!

HE-DA Series do not carry the high efficiency only in the naming - the efficiency of the model range peaks at impressive 96 % in 165 W model! The efficiency stability is extraordinary across the operating windows too, even with lower loads. This means lower energy bills and long term investment for our environment.

Doubled output connectors in 120 W & 165 W models minimize the amount of wiring in luminaires with 2 rows of parallel LED modules. Wide operating windows will cover wide range of LED loads and reduce the number of driver product codes in the luminaire manufacturer’s warehouse.

Output current of the 35 W, 50 W and 80 W models can be set conveniently with DIP switches, and that is not all! Through Helvar Components’ innovative Smart Switch technology, the DIP switch current values for different positions can also be programmed with NFC or DALI bus by the user to differ from the factory defaults! Program your custom output currents in our Helvar Driver Configurator tool and driver will follow this in DIP switch setting.

Ensuring future-proofness of the HE-DA Series, the Smart Data (DALI Parts 251-253) banks are built in as well as Helvar Components exclusive histograms for even more in-depth data logging throughout the driver lifetime.

The familiar set of modern features like Switch-Control 3, Corridor Control, DC Emergency mode with central battery support and CLO are onboard, everything programmable flexibly through wireless NFC or DALI bus.